| Model |
Manufacturer |
Description |
Compare Prices |
| 0.1A Negative Fixed Voltage Regulators |
Maplin |
A range of 3 negative fixed voltage regulators in a TO92n style case. Order Code WQ85G WQ86T WQ87U Output regulation -5V 5% -12V 5% -15V ±5% (typ.) (V) Line regulation 1 1 1.5 (typ.) (%/V) Load Rej. (typ) 0.2 0.2 0 |
 |
| 0.1A Positive Variable Regulator |
Maplin |
The LM317LZ is a positive variable regulator in a TO92s style case and has the following specifications: Output voltage typ. (V): +1.2V to +37V Line regulation typ. (%/V): 0.01 Load regulation (%): 0.1 Ripple rej. (dB): 80 Quiescent curr |
 |
| 100k Bead Thermistor |
Siemens |
A 100k bead thermistor for general applications, in particular, accurate temperature measurement. The case has a black epoxy resin coating and tinned leads. Tolerance: ±2% Power (max.) 350mW at 25°C 220mW at 60°C Diss |
 |
| 100V Line-Matching Transformer |
Maplin |
A 100V 30W line transformer for multiple loudspeaker and public address systems. The transformer offers a power output of 1, 2, 5 or 30W, selected by connecting the appropriate primary taps. Impedance matching: 4, 8 or 16Ohms., selected by connecting the |
 |
| 100W UK to USA Voltage Convertor |
Maplin |
The unit incorporates a 3-pin USA-type socket as standard. These units are ideal for running all types of electrical appliances, not exceeding the maximum load of 100W. Operate USA electrical appliances in the UK up to a maximum of 100W Lightweight a |
 |
| 10m Desoldering Reels |
Servisol |
Features Free from colophony resin, a known repiratory sensitiser Improved health and safety benefits Uses a No-Clean flux Any residue is non-conductive and need not be cleaned Improved solder absorption which means faster de-soldering is achiev |
 |
| 10mm Bi-Colour LED |
Kingbright |
A three-lead 10mm LED, which has uniform light output and a low power consumption. It has a common cathode, which is the central longest lead. The red anode is the medium length lead and the green anode is the shortest lead. This LED has a milky white dif |
 |
| 10mm Flashing LEDs |
Kingbright |
A range of 10mm LEDs which have a built-in blinking IC and a blinking frequency from 3Hz to 1.5Hz within an operating voltage of 3.5V to 14V. The cathode is denoted by the short lead. All types have a diffused lens and a viewing angle of 60, except for Or |
 |
| 10mm LEDs |
Kingbright |
A high brightness,10mm diameter LED available in three colours. A panel mounting clip is available, sold separately. The cathode is denoted by the short lead. All types have a diffused lens and a wide viewing angle of 60. Specifications: Order Code UK |
 |
| 10mm Super Bright LEDs |
Kingbright |
A range of super bright, 10mm LEDs with long life and solid state reliability. The cathode is denoted by the shortest lead. Two LEDs are available with water clear lenses and a viewing angle of 40 (Order Codes UK28F and N47AT) and one LED has a diffused r |
 |
| 10mm Types |
Kingbright |
Hibri Green Yellow Super Ultra red red red Light output typical at VF = 9V 12.5mcd 8mcd 12.5mcd 120mcd 800mcd Forward current average at 9V 9.5mA 9mA 9.5mA 16.5mA 16.5mA Power dissipation (max) 200mW 200mW 200mW 240mW 240mW Peak wavelength 625nm 565nm 59 |
 |
| 10 Segment Display <I> |
Kingbright |
A 10-segment LED ladder encapsulated in a 20-pin DILpackage. Designed for use as solid state level indicators, each LED is completely separate from theothers in the package. The LEDs may be driven from the LM3914, LM3915 orLM3916 bargraph driver ICs. The |
 |
| 10VA PCB Mounting Transformers |
Maplin |
Vacuum potted Split bobbin winding Insulation class ta 70 C/B Short circuit proof VDE, SEV, UL, CSA & ENEC approved Specifications: Order Part Secondary Secondary No load code Number Voltage Current voltage N78AZ SE 48.0901 |
 |
| 10 Watt Wirewound Resistor |
Maplin |
A range of high quality wirewound resistors sealed ina high insulation ceramic block. The block is heat and moisture resistant and non-flammable. The resistors are low noise, very stable and have an overload capability of ten times the rated power for 5 s |
 |
| 12.7mm (0.5 Inch) Single Digit Numeric Display |
Kingbright |
A high brightness 0.5 display featuring highly legible, bold, solid segments which are fast switching and offer low power consumption and compatibility with integrated circuits. Available in common anode (Order Code FR39N) and common cathode (Order Code F |
 |
| 12V 3mm LEDs |
Kingbright |
A range of 3mm diameter LEDs from the 12V series in a T-1 package. These LEDs are designed to connect across 12Vdc power supply rails. They have a 12V integral current limiting resistor, which means no external current limiter is required with a 12V suppl |
 |
| 12V Soldering Iron MLXS |
Antex |
A low voltage 25W soldering iron designed to work from a 12V car battery. The iron has the same specifications as the XS mains iron. The bits are interchangeable with the XS iron. The MLXS is supplied with a 3mm bit (bit no. 51), two large crocodile clips |
 |
| 12V Super-Bright LEDs |
Kingbright |
Super-bright versions of the 3mm and 5mm red and green LEDs. Package dimensions are standard and will fit 5mm LED panel clips. Cathode is denoted by the flat on the body and the shorter of the two leads. Viewing angle is 1208 in all cases. Package mate |
 |
| 12W Miniature Soldering Iron Type M |
Antex |
A 12W miniature 230Vac soldering iron which has a heating element contained in a stainless steel shaft, such that the heat is transferred to the bit with maximum efficiency. The soldering bit (No. 10, fitted) can be easily removed from the shaft for repla |
 |
| 15W Miniature Soldering Iron Type C |
Antex |
A 15W miniature 230Vac soldering iron which has a heating element contained in a stainless steel shaft, such that the heat is transferred to the bit with maximum efficiency. The soldering bit (No. 820 fitted) can be easily removed from the stainless steel |
 |
| 16A Relay for Automotive Applications |
Maplin |
A PCB mounting heavy duty relay primarily intended for automotive applications e.g. switching horns, lights etc. The contacts are rated at 16A at 125Vac/24Vdc. Contact configuration is single pole change over. Coil is rated at 12V. Overall dimensions: 32 |
 |
| 16VA PCB Mounting Transformers |
Maplin |
Vacuum potted Split bobbin winding Insulation class ta 70 C/B Short circuit proof VDE, SEV, UL, CSA & ENEC approved Specifications: Order Part Secondary Secondary No load code Number Voltage Current voltage N86AZ SE 54.0901 |
 |
| 18-Turn Cermet Preset Potentiometers |
Maplin |
An 18-turn cermet preset with slipping clutch (23 mechanical turns), end stops and infinite electrical resolution. Power rating 0.75W at 70C. Max working voltage 315V. Tolerance: ±10%. Temperature coefficient: ±100ppm/C max. Values |
 |
| 18W Miniature Soldering Iron Type CS |
Antex |
An 18W precision miniature soldering iron featuring a double shaft. An inner shaft of ceramic provides a very low leakage current of 2µA and has an outer stainless steel sleeve for strength. It is intended for use with modern miniature component |
 |
| 1A Negative Fixed Regulators |
Maplin |
A range of negative fixed voltage regulators in P1n style cases. All regulators in this range, with the exception of LM2930A (AH87U), have a quiescent current of between 1 and 1.5mA, a ripple regulation of 60dB and a line regulation of between 0.06 and 0. |
 |
| 1A Top Value Positive Fixed Regulators |
Maplin |
This range of three terminal standard voltage regulators provides an economical and attractive alternative to branded manufacturers products. Output voltages for the three devices are +5V, +12V and +15V, with an output regulation figure of ± 4% |
 |
| 1mW 3V Laser Module |
Maplin |
A laser diode which features built-in power stabilisation, built-in slow start and heatsink. The device is complete with optics and electronics, yet is only 27·5mm long and 10·5mm in diameter. Operating mode is continuous wave with small beam diverg |
 |
| 230Vac Toroidal Mains Transformers |
Maplin |
High output with low space requirement Flat structural shape allows exceptional equipment design Very low magnetic leakage field - ideal for audio, video and measuring techniques Protected against high winding temperatures by an integrated temper |
 |
| 24Vdc - 12Vdc 3A Voltage Converter |
Maplin |
This module enables you to operate 12Vdc devices from a 24Vdc power supply used in lorries, etc. The maximum power handling of this module is 3A. As this module may become very hot during operation, it is advisable to fit a heat sink or, if the vehicle ha |
 |
| 24V Waterproof Panel Indicator LEDs |
Maplin |
A range of 24V brass bodied, chrome finished indicators available in 5 colours. The LEDs are supplied with a washer and locking nut and are designed to the IP67 specification. The glass lens is sealed by an O-ring. All colours have a reverse voltage of 5V |
 |
| 25W Soldering Iron Type XS |
Antex |
A strongly recommended 25W 230V mains soldering iron, ideal for soldering transistors and integrated circuits since the leakage current is 2µA. It has a shatterproof handle and detachable hook. The iron is designed to use the same bits as the X2 |
 |
| 26mm (1 Inch) Single Digit Numeric Display |
Maplin |
A very large display with an overall character height of 26mm (1in.). Available with common anode (Order Code FA03D) or common cathode (FA04E) in high efficiency red. This display has a low current operation, excellent character appearance, high light out |
 |
| 26mm LED Cluster |
Kingbright |
A 26mm highly visible LED cluster that is housed in a waterproof package with hood, and is suitable for in and outdoor information boards. The cluster has 14 x 5mm LEDs, made up from six super-bright red and eight super-bright green LEDs. This will also a |
 |
| 28swg Resistance Wire |
Maplin |
28swg Constantan (55-60% copper, 45-40% nickel) wire suitable for making rheostats etc. Can be used as a thermocouple when twisted with copper wire. A temperature difference between the wires of approx 25C gives around 1mV with temperatures in the range 0 |
 |
| 2A Positive Fixed Regulators |
Maplin |
This range of positive fixed voltage regulators have a quiescent current of 8mA, a short curcuit current of 500 mA, a ripple rej. of between 46 and 54dB and are housed in a P1d style case. The output voltage has a tolerance of ±4%. The input vo |
 |
| 2M Async. SRAM 3V 70nS |
Maplin |
Access time - 70nS CMOS low power operating - 35mA typical Single 2.5 - 3.6V power supply All inputs & outputs TTL compatible Fully static operation Three states outputs Order Package Package style code style description N56BA ST |
 |
| 2mm Ceramic LEDs |
Maplin |
Ceramic based 2mm diameter LEDs ideal for pin-point indicators where space is at a premium. Available in red and green. A red spot on the package denotes the anode. Specification (IF=20mA) Red Green Luminous intensity: 1·5mcd 1·5mcd Pe |
 |
| 2VA PCB Mounting Transformers |
Maplin |
Vacuum potted Split bobbin winding Insulation class ta 70 C/B Short circuit proof VDE, SEV, UL, CSA & ENEC approved Specifications: Order Part Secondary Secondary No load code Number Voltage Current voltage N48AZ SE 30.0601 |
 |
| 30W Soldering Iron |
Maplin |
A budget priced iron, ideal for general purpose soldering. It is fitted with a fine point bit which is held in place by a grub screw. Fine point & chisel bits are available separately. |
 |
| 3.2VA PCB Mounting Transformers |
Maplin |
Vacuum potted Split bobbin winding Insulation class ta 70 C/B Short circuit proof VDE, SEV, UL, CSA & ENEC approved Specifications: Order Part Secondary Secondary No load code Number Voltage Current voltage N62AZ SE 38.0901 |
 |
| 3mm Bi-Colour LEDs |
Maplin |
A three-lead 3mm LED, with one common lead, supplied in a T-1 package, which has uniform light output and a low power consumption. Both types are common cathode, which is the central longest lead. The red anode is the medium length lead and the green anod |
 |
| 3mm Bi-Level PCB Mounting LEDs |
Maplin |
A range of high efficiency, bi-level, 3mm, PCB mounting LEDs with diffused lenses and a viewing angle of 35. The LEDs are mounted in a black plastic housing and are suitable for pitches of 5 and 5.08mm. The following colour combinations are available: Or |
 |
| 3mm Blue LEDs |
Maplin |
A low-cost blue LED available with either a blue diffused lens (Order Code JA27E) or water clear package (Order Code JA28F). Specifications: Luminous intensity IF=30mA: 0.6mcd typical Peak wavelength: 470nm Forward voltage max.: 3.3V For |
 |
| 3mm Blue Super Bright LED |
Nichia |
A high power super bright 3mm blue LED with superior weather resistance. The LED has a water clear lens and a viewing angle of 15. Typical applications include advertising signs, indicators, LCD back lights and illuminations. Specifications: Order Cod |
 |
| 3mm Diameter Type |
Toshiba |
A range of high quality, bright, 3mm LEDs available in red, green and yellow. and with diffused lens. The optical construction ensures the LEDs have a superior light output, low drive current and a fast response time - ideal for pulse operation. The v |
 |
| 3mm Diameter Types |
Kingbright |
A good quality, bright, miniature LED available in six colours. Case size: 3mm dia. A panel mounting clip is available, sold separately. Cathode denoted by flat on body and by short lead. Red Green Orange Yellow Pure 144 Pure Green Orange Part numbe |
 |
| 3mm Flashing LEDs |
Kingbright |
A range of LEDs which flash approximately twice a second when a voltage between 3.5V and 14V is connected to them. Within the supply voltage range, no series resistor is required. These LEDs have a built-in blinking IC and have a blinking frequency from 3 |
 |
| 3mm High Bright Blue LEDs |
Kingbright |
Two 3mm, high bright LEDs with low power consumption, which are suitable for full colour LED displays, indicators and diagnostic/analytical equipment. Specifications: Order Code JA20W: Blue Diffused Kingbright description: L-934MBD Lens type: |
 |
| 3mm High Brightness Blue LED |
Kingbright |
3mm high quality, high brightness blue LED available with either a blue-diffused or water clear casing. Specification Diffused Clear Part no.: L-934MBD L-934MBC Light output: 40mcd 90mcd Viewing angle: 608 208 Peak wavelength: 430nm DC forward current |
 |
| 3mm LEDs |
Kingbright |
A range of 3mm high intensity, low power consumption LEDs supplied in a popular T-1 diameter package. The cathode is denoted by the shortest leg. All LEDs have a diffused lens and a viewing angle of 60. Specifications: Order Code WL32K: Bright Red |
 |
| 3mm LEDs |
Toshiba |
A range of high quality 3mm diameter LEDs available in red, green and yellow. The optical construction ensures the LEDs have a superior light output, low drive current and a fast response time - ideal for pulse operation. The cathode has the shortest lead |
 |
| 3mm Low Current LEDs |
Kingbright |
A range of 3mm diameter, very low current (2mA) LEDs available in 4 colours. Features include high light output at low current and low power consumption. All types have a diffused lens and a wide viewing angle of 60. Specifications: Order Code CJ55K: |
 |
| 3mm PCB Mounting LEDs |
Maplin |
A range of high efficiency, 3mm, PCB mounting LEDs with diffused lenses and a viewing angle of 30. The LEDs are mounted in a black plastic housing and are suitable for pitches of 5 and 5.08mm. Specifications: Order Code N94AX: Red Reverse voltage |
 |
| 3mm Recessed Panel Indicator LEDs and Bezels |
Maplin |
A range of 3mm LED brass bodied, chrome finished, recessed indicators available in 5 colours. The LEDs are supplied with a washer and locking nut and have a recessed front panel. All colours have a reverse voltage of 5V, a 6mm diameter drilling hole and a |
 |
| 3mm Rounded Panel Indicator LEDs and Bezels |
Maplin |
A range of 3mm LED brass bodied, chrome finished, prominent indicators available in 5 colours. The LEDs are supplied with a washer and locking nut and have a rounded front panel. All colours have a reverse voltage of 5V, a 6mm diameter drilling hole and |
 |
| 3mm Super Bright LEDs |
Kingbright |
Two 3mm super bright, low current capability LEDs with outstanding material efficiency. The cathode is denoted by the shortest leg. Specifications: Order Code UF72P: Super Bright Red Kingbright description: L-934SRC-E Lens type: Water clear |
 |
| 3mm White LED |
Nichia |
An extreme brightness 3mm white LED with a spectral output from 750nm to 470nm approx. The cathode is denoted by the the shortest leg. Specifications: DC forward voltage: 3.6V typ (4.0Vmax) DC forward current 30mA DC reverse voltage: 5V(max) DC reverse c |
 |
| 3mm White LEDs |
Nichia |
Two high power, 3mm white LEDs with superior weather resistance. Typical applications include advertising signs, indicators, LCD back lights and illuminations. Specifications: Order Code GV65V: White Nichia description: NSPW310BS Viewing angle |
 |
| 3mW 6-12V Laser Module |
Maplin |
A class IIIA laser diode capable of delivering an output power of 3mW (nominal), at 670nm (red). The beam is index guided, which gives a clearer spot than gain guided devices, and can operate from a battery. These devices are suitable for general pu |
 |
| 3 Watt Wirewound Resistor |
Maplin |
A range of high quality wirewound resistors sealed in a high insulation cement box. The box is heat and moisture resistant and non-flammable. The resistors are low noise, very stable and have an overload capability of ten times the rated power for 5 secon |
 |
| 40A Relay for Automotive Applications |
Maplin |
Designed with automotive applications in mind, this high power relay is capable of switching loads up to 40A at 12V. Suitable for controlling spotlights, heater systems, wiper motors, compressor driven air horns, tailgate lifts etc. Electrical contact is |
 |
| 45mm (1.8 Inch) Bi-Colour Single Digit Numeric Display |
Kingbright |
A high brightness, 45mm, 7-segment display with bold, legible and solid segments which can be lit in either red or green, or a combination of the two. This is achieved through the use of two common anodes, one for red and the other for green. The individu |
 |
| 45W UK to USA Voltage Convertor |
Maplin |
NB: This product is not suitable for appliances requiring an earth.Features: Allows USA equipment to operate in the UK Robust plug top ABS housing Thermal fuse protection Output sockets UL/CSA listed Specifications: Input power: 230Vac &p |
 |
| 4M Async. SRAM 3V 70nS |
Maplin |
Fast access time - 70nS CMOS low power consumption - 35mA typical Single 2.7 - 3.6V power supply All inputs & outputs TTL compatible Fully static operation Three state outputs Order Package Package style code style description N58 |
 |
| 50W Temperature Controlled |
Antex |
A 50W 230V AC mains operated temperature controlled soldering iron with the temperature controller built into the handle of the iron. A thermocouple near the tip of the heating element provides feedback for temperature control within the range 200 to 450C |
 |
| 52mm Red LED Cluster |
Kingbright |
A high intensity 52mm red LED cluster housed in a waterproof plastic housing that is suitable for large in or outdoor display applications such as sign or message boards. The cluster comprises of an array of super-bright GaAlAs LEDs and has a maximum lumi |
 |
| 5A and 10A Miniature Relay |
Maplin |
A PCB mounting miniature relay with single pole change over contacts rated at either 5A at 240Vac/ 24Vdc or 10A at 110Vac/24Vdc, coil voltages 6V and 12V. The relay is fully enclosed and contacts are silver. Coil details (5A contact rating) Nominal volt |
 |
| 5A DC Meter |
Maplin |
meter, ideal for car battery chargers, or high current power supplies. The scale is colour graded for easy reading: blue from 0 to 2·5A, green from 2·5 to 3·5A and red from 3·5 to 5·5A. Connections are by 6.35mm (¼ in.) Lucar style push- |
 |
| 5A Miniature Relay |
Maplin |
A fully enclosed relay capable of carrying 5A and having pins for direct PCB mounting or for use with socket available separately. The relay is available with double-pole or 4-pole changeover contacts, with 6Vdc, 12Vdc or 24Vdc coils. |
 |
| 5mm 12V LEDs |
Kingbright |
A range of 5mm diameter LEDs from the 12V series in a T-1¾ package. These LEDs are designed to connect across 12Vdc power supply rails. They have a 12V integral current limiting resistor, which means no external current limiter is required with a 12V |
 |
| 5mm Bi-colour LED |
Kingbright |
A two-lead 5mm LED with a red and green die connected in inverse parallel. Only one series resistor is required. This LED has a white diffused lens and a viewing angle of 60. Specifications: Order Code QY83E: High Efficiency Red/Green Kingbright de |
 |
| 5mm Bi-colour LEDs |
Kingbright |
A three-lead 5mm LED, with one common lead, supplied in a T-1 ¾ package, which has uniform light output and a low power consumption. Both types are common cathode, which is the central longest lead. The red anode is the medium length lead and the gree |
 |
| 5mm Blue LED |
Nichia |
An extreme brightness 5mm blue LED which is available in both 158 and 308 viewing angle. The cathode is denoted by the shortest leg. Specifications: DC forward voltage: 3.6V typ (4.0Vmax) DC forward current 30mA DC reverse voltage: 5V(max) DC reverse curr |
 |
| 5mm Blue LEDs |
Kingbright |
5mm high quality, high brightness blue LEDs available with either a blue-transparent, or water-clear casing. These LEDs have a low power consumption and are ideal for full colour LED displays, indicators and analytical equipment. Specifications: Order |
 |
| 5mm Blue LEDs |
Maplin |
A low-cost 5mm blue LED available with either a diffused or water clear lens. Both LEDs have a narrow viewing angle of 15. Specifications: Order Code JA29G: Diffused Blue Forward voltage max. at IF=30mA: 3.4V Reverse voltage max.: 5V Wave |
 |
| 5mm Extreme Brightness LEDs |
Toshiba |
A range of extreme brightness 5mm LEDs ,which are suitable for use in outdoor signboards, safety equipment and any application which requires an LED to be visible in high ambient light. These LEDs have a fast response time and are capable of pulse operati |
 |
| 5mm Flashing Blue LED |
Kingbright |
A 5mm flashing LED with a blue diffused lens and a viewing angle of 60. The cathode is denoted by the shortest leg. The LED has a flashing frequency of 3Hz-1.5Hz at 5V-14V. Specifications: Order Code N65AJ: Diffused Blue Kingbright description: L- |
 |
| 5mm Flashing LEDs |
Kingbright |
A range of LEDs which have a built-in blinking IC and a blinking frequency from 3Hz to 1.5Hz. They are supplied in a T-1¾ package and the cathode is denoted by the short lead. All types have a diffused lens and a viewing angle of 60. Specifications: |
 |
| 5mm LEDs |
Kingbright |
A range of high intensity, low power consumption, standard 5mm LEDs supplied in a popular T-1¾ package and available in 7 colours. The cathode is denoted by the flat on the body and by the short lead. All LEDs have a diffused lens and a viewing angle |
 |
| 5mm LEDs |
Toshiba |
A range of high quality, bright, 5mm LEDs available in red, green and yellow. The optical construction ensures the LEDs have a superior light output, low drive current and a fast response time - ideal for pulse operation. The recommended forward current i |
 |
| 5mm Low Current LEDs |
Kingbright |
A range of 5mm very low current (2mA) LEDs available in 4 colours. The LEDs have low power consumption with high light output at low currents. The cathode is denoted by the shorter of the 2 leads and a flat on the body. All types have diffused lenses and |
 |
| 5mm Low Current Types |
Kingbright |
A range of 5mm very low current (2mA) LEDs available in 4 colours. The LEDs will fit the appropriate clips (see LED clips). Packages are diffused with the cathode denoted by the shorter of the 2 leads and a flat on the body. Viewing angle for all types is |
 |
| 5mm Oval Bi-Colour LED |
Kingbright |
A 5mm bi-colour oval LED, which gives a wider viewing angle in the horizontal direction of 60 while the vertical viewing direction has an angle of 30. The LED has 3 leads, the central one being the common anode, and emits super bright red through both cat |
 |
| 5mm Pink LEDs |
Maplin |
A high performance 5mm pink LED available with either a water clear lens and narrow viewing angle of 15 (Order Code N25AT) or a diffused lens and a wide viewing angle of 60 (Order Code N26AT). The cathode is denoted by the shorter leg. Specifications: |
 |
| 5mm Recessed Panel Indicator LEDs and Bezels |
Maplin |
A range of 5mm LED brass bodied, chrome finished, recessed indicators available in 5 colours. The LEDs are supplied with a washer and locking nut and have a recessed front panel. All colours have a reverse voltage of 5V, a 6mm diameter drilling hole and a |
 |
| 5mm Rounded Panel Indicator LEDs and Bezels |
Maplin |
A range of 5mm LED brass bodied, chrome finished, prominent indicators available in 5 colours. The LEDs are supplied with a washer and locking nut and have a rounded front panel. All colours have a reverse voltage of 5V, an 8mm diameter drilling hole and |
 |
| 5mm Super Bright Blue LEDs |
Nichia |
An extreme brightness 5mm clear blue LED which is available with viewing angles of both15 and 30. These LEDs are ideal for applications in advertising signs, indicators, LCD back lights and other illuminations. The cathode is denoted by the shortest leg. |
 |
| 5mm Super Bright Green LED |
Nichia |
A super bright, 5mm green LED which is available in 2 different luminous intensities. The cathode is denoted by the shortest leg. Specifications: Order Code NR86T: Green Nichia description: NSPG510S Viewing angle: 30° Forward volta |
 |
| 5mm Super Bright Green LEDs |
Kingbright |
A high brightness, 5mm green LED available with either a water clear (Order Code CK39N) or diffused (Order Code CK40T) lens. The cathode is denoted by the flat on the body and by the short lead. Specifications: Order Code CK39N: Clear Green Kingb |
 |
| 5mm Super Bright LEDs |
Kingbright |
The cathode is denoted by the flat on the body and the short lead. The LEDs have either a water-clear lens with a narrow viewing angle of 30 or a diffused lens with a wide viewing angle of 60 Specifications: Order Code UK51F: Clear Red Kingbright d |
 |
| 5mm Super Bright Orange LEDs |
Kingbright |
2 very bright orange LEDs with water clear lenses, both having low power consumption and high intensity. Specifications: Order Code N48AT: Super Orange Kingbright description: L-53SEC-E Viewing angle: 30° Forward current max.: 40mA |
 |
| 5mm Turquoise LED |
Maplin |
A high performance 5mm turquoise LED with a water clear lens and narrow viewing angle of 15. The cathode is denoted by the shorter leg. Order Code N27AT: Clear Turquoise Viewing angle: 15° Forward voltage max. at IF=20mA: 3.8V Reverse |
 |
| 5mm Types |
Kingbright |
5mm Types Red Green Yellow Hibri Super red red Light output typical atVF = 9V 2mcd 8mcd 12.5mcd 12.5mcd 70mcd Forward current average at 9V 8.5mA 9mA 9.5mA 9.5mA 16.5mA Power dissipation (max) 200mW 200mW 200mW 200mW 240mW Peak wavelength 660nm 565nm |
 |
| 5mm Violet LED |
Maplin |
A high performance 5mm violet LED with a water clear lens and narrow viewing angle of 15. It is particularly suitable for automotive dashboard lighting, white LEDs and backlighting. The cathode is denoted by the shorter leg. Specification: Order Code |
 |
| 5mm White LEDs |
Nichia |
3 high power, extreme brightness, 5mm white LEDs, which have superior weather resistance. These LEDs are ideal for use in advertising signs, indicators, illuminations and LCD backlight applications. The cathode is denoted by the shortest leg. Specificat |
 |
| 5V 3mm LEDs |
Kingbright |
Two 3mm diameter LEDs from the 5V series in a T-1 package. These LEDs have a 5V integral current limiting resistor, which means no external current limiter is required with a 5V supply. Both types have a diffused lens and a wide viewing angle of 60. Spec |
 |
| 5V 5mm LEDs |
Kingbright |
Two 5mm diameter LEDs from the 5V series in a T-1¾ package. These LEDs have a 5V integral current limiting resistor, which means no external current limiter is required with a 5V supply. Both types have a diffused lens and a wide viewing angle of 60. |
 |
| 5V and 12V LED Types |
Kingbright |
A range of standard sized 3mm and 5mm coloured LEDs which are designed to connect directly across 5V DC and 12V DC power supply rails, having a built-in resistor thus greatly simplifying design and assembly. The encapsulations are also standard and w |
 |
| 5VA PCB Mounting Transformers |
Maplin |
Vacuum potted Split bobbin winding Insulation class ta 70 C/B Short circuit proof VDE, SEV, UL, CSA & ENEC approved Specifications: Order Part Secondary Secondary No load code Number Voltage Current voltage N71AZ SE 42.0901 |
 |
| 6 and 12V 6A Miniature Relays |
Maplin |
Double pole double throw changeover relays with either 6V or 12V coils. Construction is similar to 12V 16A relay above. Dimensions: 30 x 13 x 27mm high excluding pins. Pin length: 3·5mm. Contact Details: |
 |
| 6 Piece Soldering Aid Set |
Maplin |
A set of six useful soldering aids ideal for printed circuit board work. Each tool has two different ends. |
 |
| 7mm (0.3 Inch) Single Digit Numeric Display |
Kingbright |
Standard, high brightness red 0.3 LED display with a grey face and white segment available as type 1, common anode or type 4, common cathode. The pins of these packages will fit a standard 14-pin DIL socket. Specifications: Order Code FR36P: High Eff |
 |
| 7 Watt Wirewound Resistor |
Maplin |
A range of high quality wirewound resistors sealed in a high insulation cement box. The box is heat and moisture resistant and non-flammable. The resistors are low noise, very stable and have an overload capability of ten times the rated power for 5 secon |
 |
| 8mm 12V Panel Mount LEDs with Chrome Bezels |
Maplin |
A range of 12V, 8mm panel mounting LEDs with chrome bezels available in 5 colours. The LEDs are supplied with a washer and locking nut . All colours have a reverse voltage of 5V, an 8mm diameter drilling hole and a thread size M8x0.75mm. Specifications: |
 |
| 8mm 12V Panel Mount LEDs with Plastic Bezel |
Maplin |
A range of 12V, 8mm panel mounting LEDs with plastic bezels available in 5 colours. The LEDs are supplied with a washer and locking nut . All colours have a reverse voltage of 5V, an 8mm diameter drilling hole and a thread size M8x0.75mm. Specifications |
 |
| 8mm 24V Recessed Panel Indicator LEDs |
Maplin |
A range of 24V, 8mm, brass bodied, chrome finished, recessed indicators available in 5 colours. The LEDs are supplied with a washer and locking nut and have a recessed front panel. All colours have a reverse voltage of 5V, an 8mm diameter drilling hole an |
 |
| 8mm 24V Rounded Panel Indicator LEDs |
Maplin |
A range of 24V, 8mm LED,brass bodied, chrome finished, prominent indicators available in 5 colours. The LEDs are supplied with a washer and locking nut and have a rounded front panel. All colours have a reverse voltage of 5V, an 8mm diameter drilling hole |
 |
| 8mm Flashing Blue LED |
Kingbright |
An 8mm flashing LED with a blue diffused lens and a viewing angle of 60. The cathode is denoted by the shortest leg. The LED has a flashing frequency of 3Hz - 1.5Hz at 5V-14V. Specifications: Order Code N66AJ: Flashing Blue Kingbright description: |
 |
| 8mm Flashing LEDs |
Kingbright |
A range of 8mm LEDs which have a built-in blinking IC and a blinking frequency from 3Hz to 1.5Hz. The cathode is denoted by the short lead. All types have a diffused lens and a viewing angle of 60, except for Order Code UK42V, which has a water clear lens |
 |
| 8mm LEDs |
Kingbright |
A high brightness 8mm diameter LED available in three colours. A panel mounting clip is available, sold separately. The cathode is denoted by the flat on the body and by the short lead. All types have a diffused lens and a wide viewing angle of 60. Spec |
 |
| 8mm Super Bright LEDs |
Kingbright |
A range of super bright, 8mm LEDs with long life and solid state reliability. The cathode is denoted by the shortest lead. Two LEDs are available with water clear lenses and a viewing angle of 40 (Order Codes UK24B and N46AT) and one LED has a diffused re |
 |
| 8mm Types |
Kingbright |
Hibri Green Yellow Super Ultra 225 red 288 red red Light output typical at VF = 9V 12.5mcd 8mcd 12.5mcd 120mcd 800mcd Forward current average at 9V 9.5mA 9mA 9.5mA 16.5mA 16.5mA Power dissipation (max) 200mW 200mW 200mW 240mW 240mW Peak wavelen |
 |
| 9.5mm (3/8â?) Square 22-Turn Cermet Preset Potentiometers |
Maplin |
A 22-turn cermet preset with slipping clutch (25 mechanical turns) and an audible click at each end of travel to define the ends. This professional quality trimmer is designed for applications where reliability and small size are major considerations. Inf |
 |
| Abrasive Fibreglass Pencil |
Maplin |
A fibreglass abrasive stick housed in a propelling pencil type case. Designed for removing protective lacquer coatings on PCB board, prior to repair, and generally cleaning copper track for soldering. A spare fibreglass stick is available (Order Code KR62 |
 |
| AD-100 Breadboard |
Maplin |
This breadboard consists of two sections; one section of 30 blocks of six rows labelled â??Aâ?? to â??Fâ??, and an identical section labelled â??Gâ?? to â??Lâ??. Can be connected to AD-01(BZ13P), AD-4D(AG07H), AD-10(BZ12N), AD-101 |
 |
| AD-101 Breadboard |
Maplin |
This breadboard is constructed from one of AD-4D(AG07H) and one of AD-100(AG08J), complete with a self-adhesive pad for attaching to a suitable surface. The breadboard can also be attached to AD-01(BZ13P), AD-4D(AG07H), AD-10(BZ12N), AD-100(AG08J) and AD- |
 |
| AD-102 Breadboard |
Maplin |
This breadboard is constructed from two of AD-4D and one of AD-100(AG08J) in between. A self-adhesive pad is attached to the rear of the breadboard. Can also be connected to AD-01(BZ13P), AD-4D(AG07H), AD-10(BZ12N), AD-100(AG08J), AD-101(AG09K), or other |
 |
| ADC0804LCN 8-Bit A/D Converter |
Maplin |
Specifications: +5V (Vcc) Max error: ±1 bit Input resistance at pin 9: 1·3k Ohms Analogue input voltage range: Ground to Vcc Conversion rate: 8770/second max. Supply current: 1·3mA |
 |
| Adjustable Wrist Strap |
Maplin |
A low-cost, conductive, adjustable wrist strap with 10mm press stud. |
 |
| Advanced Solderless Breadboard System |
Maplin |
Advanced Solderless Breadboard System A range of solderless breadboard modules that can interconnect to suit individual requirements. The basic board AD-01 consists of four blocks of six columns of 28 rows, the sockets in each row being interconnecte |
 |
| All Weather Repair Tape |
Maplin |
A self-adhesive polythene repair tape which is especially suited to outdoor applications, due to its UV resistant construction. Ideal for temporary repairs to greenhouses, windows, car headlights and the like. Ideal for outdoor repairs Suitable for te |
 |
| Aluminium Tape |
Maplin |
A self-adhesive, 30µm thick aluminium tape 25mm wide which has many applications, particularly within the field of electronics and electrics. For example, it can be used for PCB repair, screening enclosures and circuits susceptible to RFI, and w |
 |
| AM/FM Miniature Tuning Capacitors |
Maplin |
Drawing of FT78K Miniature tuning capacitors for radios, ZN416 circuits and crystal sets. Each has an antenna section and an oscillator section for each band, and a trimmer for each section. The control shaft is a flat 6mm dia. brass spindle, tapped down |
 |
| Antistatic Bonding Plug |
Maplin |
plug with plastic live/neutral pins and brass earth pin. The earth pin is connected to a 10mm press stud via a 1M ohms resistor. An antistatic bonding |
 |
| Anti-Static Computer Mat |
Maplin |
50cm x 60cm Complete with anti-static strap Ideal for use in computer builds |
 |
| Anti-Static Computer Wrist Strap |
Maplin |
Ideal for protecting your computerâ??s components Velcro fastening Spiral flexible cable |
 |
| Art & Craft Adhesive |
Maplin |
Art & Craft adhesive has a specially prepared formula which allows objects to be repositioned before the permanent bond cures and sets. It is non-staining and will not wrinkle materials making it ideal for screen printing, picture framing and other ge |
 |
| Async. SRAM 128K x 8 3.3V |
Maplin |
Fast access time - 12/15nS Low operating power - 60mA (typical) Power supply range - 3V to 3.6V All inputs & outputs TTL compatible Fully static operation Three state outputs Specifications: Order Manufacturers Package Code part nu |
 |
| Async. SRAM 128K x 8 3.3V 35/70nS |
Maplin |
The UT62L1024 is particularly well suited for battery back-up non-volatile memory applications. Access time - 35/70nS Low power consumption - 35mA typical Power supply range - 2.7V to 3.6V All inputs & outputs TTL compatible Fully static oper |
 |
| Async. SRAM 32K x 8 3.3V 12/15nS |
Maplin |
Fast access time - 12/15nS Low power consumption - 60mA typical Single 3.3V power supply All inputs & outputs TTL compatible Fully static operation Three state outputs Order Package Package type code type description N51BA SOJ 2 |
 |
| Async. SRAM 32K x 8 3.3V 70nS |
Maplin |
Access time 70nS Low power consumption - 0.5µA Single 2.7 - 3.6V power supply All inputs & outputs TTL compatible Fully static operation Three state outputs Order Package Package style code style description N53BA TSOP- |
 |
| Async. SRAM 32K x 8 5V 12nS |
Maplin |
Fast access time - 12nS Low operating power - 80mA typical Single 5V power supply All inputs & outputs TTL compatible Fully static operation Three state outputs Specifications: Order Manufacturers Package code part number style |
 |
| Async. SRAM 32K x 8 5V 70nS |
Maplin |
Access time - 70nS Low power consumption - 30/40mA typical Single 5V power supply All inputs & outputs TTL compatible Fully static operation Three state outputs Order Package Package style code style description N48BA PDIP 28-pi |
 |
| Async. SRAM 8K x 8 5V 70nS |
Maplin |
Acces time 70nS Low power consumption - 30mA typical Single 4.5 - 5.5V power supply All inputs & outputs TTL compatible Fully static operation Three state outputs Order Package Package style code style description N54BA SOP 28-p |
 |
| Atlas Component Analyser |
Maplin |
Automatically identifies transistors, darlingtons, diode-protected transistors, resistor shunted transistors, enhancement mode and depletion mode MOSFETs, junction FETs, low power triacs, low power thyristors, diodes, diode networks, LEDs and bicolour LED |
 |
| Atlas LCR Passive Component Analyser |
Maplin |
The Atlas LCR will automatically identify inductors, capacitors and resistors, measuring the main component value and other component details (e.g. coil inductance and dc resistance) The Atlas LCR is ideal for unmarked and surface mount devices. Specifica |
 |
| Audio-Grade Polypropylene Axial Capacitors |
LCR Capacitors |
A range of capacitors that have been specially developed to be used in very high quality loudspeaker crossover networks in domestic and studio monitoring sytems and in the finest valve amplifiers - when only the very best will do. The inherently low dissi |
 |
| Automatic Superglue Pen |
Bison |
This high quality dispensing pen is simple to use and gives repeated shots of cyanoacrylate adhesive without mess. Super fast bonding of a wide range of materials with accurate precision. High-tech dispensing pen One press-one drop High strength cyan |
 |
| Axial Electrolytic Capacitors |
Phillips |
A range of axial leaded capacitors with values from 1 to 4700µF at voltages of 10 to 450V. Load life of 2000h at 85<+>0+>C. Operating temperatures of â?"40 to +85<+>0+>C. Leakage current not more than 0.03CV o |
 |
| Axial Leaded LEDs |
Kingbright |
A range of 3mm x 2.2mm leaded LEDs with a thickness of 1.5mm. They are supplied in a package similar to surface mount, allowing a very small indicator footprint which may be soldered without the use of special SMD handling equipment. All types have a wat |
 |
| BASIC Stamp Modules |
Milford Instruments |
BASIC Stamps are small modules that run easy-to-read BASIC programmes. Their low cost and powerful features make them perfect for many prototyping and control applications for both the hobbyist and industrial user alike. They are programmed from a standar |
 |
| Bead Thermistors <I> |
Philips |
Bead type thermistors for general applications including temperature measurement and compensation. Tolerance: ±5% Power (max): 250mW Dissipation factor: 7mW/°C Response time: 1·2 secs Thermal time constant: 11 secs |
 |
| Beginners Soldering Iron |
Maplin |
A robust mains-powered 25W general-purpose soldering iron. The handle is yellow and ribbed for extra grip, and a removable clip is supplied to enable the iron to be safely hung up whilst not being used. If the iron is remaining idle while still hot then t |
 |
| Bi-Colour LED |
Kingbright |
A two-lead 3mm or 5mm LED with a red and green die connected in inverse parallel. The LED fits the appropriate clip. Only one series resistor is required.The long lead denotes the red LED anode, so connect the positive to the short lead and the negative |
 |
| Bridge Rectifiers |
Maplin |
A range of bridge rectifiers with a maximum reverse current per diode of 10A at the rated piv volts. Type Case IF Max Max | Max Style PIV av. rms cap | VF p |
 |
| Bright Spark Electronic Circuit Simulator |
Maplin |
Bright Spark is a fun circuit simulation package for learning about electricity and electronics. Combining on-screen animation with realistic simulation, Bright Spark helps understanding by bringing circuits to life. Bright Spark assumes no prior knowledg |
 |
| Bushes for TO220/TOP3 & TO3 |
Maplin |
3 bushes for use with TO220/TOP3 and TO3 style cases. Sold in singles. Order Code Case style Heat resistance RN91Y TO220/TOP3 200°C RN92A TO3 130°C RN93B TO3 200°C |
 |
| Butane Refill |
Maplin |
Ideal for refilling portable gas powered soldering irons, butane powered lighters, etc. WARNING: Flammable contents, this product should be used in a well ventilated area. PLEASE NOTE: By law we are not allowed to sell butane or solvent based products to |
 |
| CA3140E & CA3240E |
Maplin |
A MOSFET input, bipolar output op-amp that will directly replace the 741 in most applications. It will operate from single or dual supply rails and input terminals can be swung up to 0.5V below negative rail. Internally compensated. Max input terminal cur |
 |
| Ceramic Resonators |
Maplin |
Three ceramic resonators that offer an alternative to quartz crystals in clock generation circuits. Both the CSA and CSB series are very stable (±0·5%), and have a high mechanical Q making them ideal for use in microprocessors and remote c |
 |
| Cermet Potentiometers |
Maplin |
A high quality cermet element rotary potentiometer for panel mounting. The cermet element gives excellent electrical and thermal stability, reliability, low noise and long life. Linear track. Power rating: 2W at 70°C Tolerance: &plusm |
 |
| Cermet Preset Potentiometers |
Maplin |
A miniature horizontal mounting cermet preset featuring high stability and excellent resolution. It has an integral dust cover, fits 2.54mm (0.1in.) matrix directly, and may be adjusted by a screwdriver from either side. Linear track only. Tolerance: & |
 |
| Chassis Mount 9-Pin B9A (Noval) Socket |
Maplin |
A gold plated ceramic socket with a separate bracket. Typically used with EL84, ECC and EF ranges of valves |
 |
| Chassis Mounting 9-Pin B9A (Noval) Socket |
Maplin |
A 9-pin B9A ceramic socket that is shielded with a 46mm aluminium can. Typically used with EL84, ECC and EF ranges of valves. |
 |
| Circuit Handbook |
Butterworth-Heineman |
A collection of Forrest Mimsâ?? classic work. Using commonly available components and remarkable ingenuity, Forrest shows you how to build and experiment with circuits like analogue comparators, audio synthesisers, data loggers, power supplies, radio c |
 |
| Class X2 Metallised Polypropylene Film Capacitors |
Maplin |
A range of Class X2 Suppression metallised polypropylene film capacitors. Typical applications are interference suppression across the line. The case is protective plastic which is solvent resistant and flame retardant to UL94V0. All capacitors are approv |
 |
| Class Y2 (X1) Metallised Polyester Film Suppression Capacitors |
Maplin |
A range of Class Y2 (X1) suppression 250Vac metallised polyester film capacitors. Typical applications are interference suppression across the line and line to ground. The case is protective plastic which is solvent resistant and flame retardant to UL94V |
 |
| Cleaning Wipes |
Maplin |
An isopropanol injected tissue for use as a cleaning wipe on surfaces prior to applying adhesive tape. Supplied in a sachet. |
 |
| Clear Tape with Dispenser |
Maplin |
1 roll of 19mm x 33m clear polypropylene tape with a re-useable plastic dispenser. Its use around the home and office is invaluable. |
 |
| Clip-on Ferrites |
Maplin |
A range of clip-on ferrite rings designed to cure electromagnetic & radio frequency interference at source. Always choose an internal diameter close to that of the cable or wind through several times. Always put ferrites at the noisy end of the cable. |
 |
| Clip-On TO220 Heatsink |
Maplin |
heatsink for vertically mounted TO220 devices, with slotted side vanes. A strong, reinforced clip allows maximum heat transfer and an integral locking tab secures the device in position. Temperature rise in centre of heatsink: 25C per watt. Dimensions: he |
 |
| Coiled Earth Cords |
Maplin |
Extremely flexible coiled ground cords for earthing an operator to an antistatic mat or earth plate. AS04E has 10mm female press studs at each end, which incorporate a 2·2M ohms resistor and strain relief. The cord measures approximately 560mm relaxed |
 |
| Component Analyser |
Maplin |
Automatically identifies transistors, darlingtons, diode-protected transistors, resistor shunted transistors, enhancement mode and depletion mode MOSFETs, junction FETs, low power triacs, low power thyristors, diodes, diode networks, LEDs and bicolour LED |
 |
| Conductive Boxes |
Maplin |
A range of electrically conductive carbon loaded boxes for the storage and transport of static sensitive devices. All boxes are designed for use with conductive foam as packing. AS12N has a removeable lid, while AS13P has a flipup hinged lid Dimensions ( |
 |
| Conductive Desoldering Pump |
Antex |
A conductive desoldering pump consisting of a nickel-plated aluminium body with a black conductive Teflon tip. This results in a low â??top-to-tipâ?? resistance. Replacement tip is available. Overall length: 195mm External diameter: 20mm Su |
 |
| Conductive Pen |
CircuitWorks |
The CircuitWorks® conductive pen is the pen dispenser for drawing highly conductive silver traces, jumpers and shielding with precision and control. Quickly creates conductive silver traces on most surfaces Valved pen tip for easy application |
 |
| Conductive Polymer Track Potentiometers |
Maplin |
The â??Ecoâ?? range of 16mm conductive polymer track potentiometers feature a semi-sealed plastic housing, and offer lower noise compared to standard carbon track types. The potentiometers feature a 40mm long x 6mm diameter shaft with a 300 rotati |
 |
| Conformal Coating Remover Pen |
CircuitWorks® |
A pen for precise removal of silicone, acrylic and urethane coatings from PCBs. Removes most types of coatings in seconds Spot cleans tight tolerance areas on circuit boards Marker dispenser provides controlled and exact application Evaporates quic |
 |
| Contact Cleaner |
Maplin |
General purpose cleaning solvent Safe to use on most plastic and fibres Removes stains, coatings, printing inks, oil, grease or dirt Low toxicity, leaves no residue Does not cause corrosion of metals Supplied in a 200ml can |
 |
| Contact Suppressor |
LCRCapacitors |
A 100 ohms resistor (±10% tolerance) and 0.1µF (±10% tolerance) capacitor connected in series. Connect directly across switch or relay contacts etc. to suppress interference when switching reactive loads. Also useful as a |
 |
| Control Studio 2 Electronics Simulation Package |
Maplin |
Control studio is a simulation package for learning about systems and control in electronics. It consists of a range of animated sub-system blocks that perform different functions such as switching or amplification. By connecting the sub-system blocks tog |
 |
| Copper-Clad Boards |
Maplin |
A range of copper-clad boards suitable for making your own printed-circuit boards. The following types and sizes are available: Single-sided SRBP: 203 x 102mm (8 x 4in.) (Small single) (HX00A) 254 x 152mm (10 x 6in.) (Medium single) (WF38R) 305 x 203mm (1 |
 |
| Cotton Twine |
Maplin |
Small ball of medium gauge cotton twine. Invaluable for applications throughout the home, office and garden. |
 |
| Cyanoacrylate Adhesive 3g |
Kwik Fix |
Excellent performing cyanoacrylate adhesive in 3g tubes, which are designed for low volume applications or controlled operations where accuracy is required. Kwik Fix cyanoacrylate will give excellent bonds on rubbers, porcelain, most plastics and metals. |
 |
| Cyanoacrylate Adhesive 5g |
Kwik Fix |
Kwik Fix 5g cyanoacrylate adhesive has a pin in cap design feature, which ensures that the nozzle is kept free for repeated use. This high performance adhesive gives excellent bond strengths on a wide range of materials and very rapid initial cure times. |
 |
| Cyanoacrylate Superglues |
Tufloc |
Tufloc fast bonding superglues are available in three viscosities. Low viscosity adhesive (Order Code N25BA) is used on close fitting surfaces. Where the gap is larger a medium viscosity (Order Code N26BA) or high viscosity (Order Code N27BA) adhesive may |
 |
| D3 and D5 Solenoids |
Maplin |
A range of DC solenoids for industrial and mechanical systems. The D3 series are capable of producing a magnet force in excess of 15N with a maximum plunger stroke of 18mm, while the D5 series can exceed 40N with a stroke of 24mm. Available in a variety o |
 |
| Debonder |
Rite-Lok |
This RiteLok AC11 debonding agent softens and breaks down cyanoacrylate bonds and removes glue from most surfaces. Useful for debonding joints, dismantling of components, cleaning areas previously bonded or cleaning accidental spillage. Ideal for use wit |
 |
| Decoupling Ceramic Disc Capacitors |
Maplin |
General purpose cement-coated ceramic disc capacitors having a large capacitance in a very small case size. Ideal for decoupling applications. Tolerance: â?"20+80% Power factor: 8% at 1kHz Value Voltage Diameter Thickness Lead pitch |
 |
| Desoldering braid |
Servisol |
A flux-impregnated, copper braid which speedily removes unwanted solder from a joint. Place the cold braid end on the solder that is to be removed. Place the hot soldering iron tip on top of the braid. Remove the braid and the hot iron at the same time. C |
 |
| Desoldering Pumps |
Antex |
A range of three desoldering pumps in various sizes and construction. To operate, the plunger is pushed down until it locks, the pump tip is then placed over the molten solder and the button pressed to release the plunger, the molten solder is now sucked |
 |
| Digital IC Tester |
Maplin |
The DT-1 digital IC tester provides digital IC testing at quality performance. The DT-1 has a 24 pin ZIF socket to suit many digital ICs. The compact size and battery operation make the DT-1 suitable for professional servicing and development of hobby env |
 |
| DIL IC Heatsinks |
Maplin |
A range of black anodised finned heatsinks for 14/16, 24 and 28 pin dual-in-line ICs. Requires no extra board space. The heatsink may be attached using contact adhesive or similar to each end and for best results it should also be smeared with heatsink co |
 |
| DIL Reed Relays |
Maplin |
A reed relay with single pole make contacts moulded in a standard 14-pin dual-in-line package. Max power 10W Max current 0·5A Max voltage 100V Contact capacitance 2pF Max contact resistance 100m Ohms Life (millions of operations) |
 |
| DIP Board |
Maplin |
This board is specifically designed to mount dual-in-line integrated circuits and, to assist in this, two power rails run between the copper pad format to facilitate easy link-up of ground and voltage rail. Up to 20 14- pin or 28 8-pin DIL packages can b |
 |
| Double Digit Display |
Maplin |
A 2-digit display available in high efficiency red (common anode and common cathode) or green (common cathode). Digits are 14.22mm (0.56in.) high with high contrast and wide viewing angles. All types have a standard grey face, white segment and a right-ha |
 |
| Double Sided Carpet Tape |
Maplin |
A double sided PVC film with an adhesive coating on each side. This tape is strong and very sticky, making it ideal for carpet fitting and other heavy duty applications. It is supplied on 50mm x 4.5m rolls (Order Code N97AL) and 50mm x 10m rolls (Order Co |
 |
| Double Sided Foam Tape |
Maplin |
A high quality double sided black polythene foam tape with a modified acrylic adhesive. It is 0.8mm thick with excellent initial grab and long term adhesion. It has many applications throughout automotive and engineering assembly. Included in the pack is |
 |
| Double Sided Paper Tape |
Maplin |
A double sided adhesive tissue tape suitable for general pupose craft applications, such as sticking photos into albums, etc. It is suppplied on a 15mm x 10m roll. |
 |
| Dual-In-Line Sockets |
Maplin |
A range of high quality, low-profile, dual-in-line sockets with black glass-reinforced polyester bodies and tin-plated phosphor-bronze contacts. The contact is made against the flat face of the IC leg for maximum contact area and low insertion pressure. |
 |
| Dual Miniature Potentiometers |
Maplin |
miniature rotary carbon track potentiometers with printed circuit board mounting terminals. Fixing hole required: 7mm. Power rating: 0·125W linear, 0·06W log. Max voltage: 200V linear, 150V log. Overall shaft length 20mm. Linear types are ma |
 |
| Dust and Dirt Removers |
Servisol |
Quickly removes dirt, dust and loose particles from delicate equipment and inaccessible areas Ideal for use on computers, cameras, watches and other electronic components and equipment Non-flammable formulation Extension tube to reach inaccessible a |
 |
| Economy Desoldering Pump |
Maplin |
Powerful desoldering tool which quickly removes molten solder from joint. Spring loaded piston is closed while solder is being melted, then released by a simple push button. The cylinder is made of aluminium for increased resistance to wear. The nozzle is |
 |
| Electric Glue Gun |
Maplin |
A lightweight hot melt glue gun with a suprisingly high delivery for its size. The flow of glue is delivered by a trigger mechanism. Replacement glue sticks are available and sold in packs of 10 (Order Code N05AT) Ideal for gluing wood and plastic Maxi |
 |
| Electronic Cleaning Solvent |
Servisol |
Safe and effective cleaning of electronic and electrical components Safe on plastics and rubber Rapid evaporation Ideal for PCBs, tape heads, kits, business machines and all electronic components Supplied in a 200ml aerosol can |
 |
| Electronic Component Lucky Bags |
Maplin |
This range of component lucky bags offer great value for money and contain an random assortment of widely used types & values. |
 |
| Electronics Made Simple |
Butterworth |
Look no further for a readable basic guide. If you are just about to begin a course which involves electronics, are interested in the subject but do not know where to start, or simply need a quick and straightforward revision of the basics, then this is t |
 |
| Engineerâ??s Wipes |
Servisol |
A high quality, large size, lint free cleaning wipe designed for general cleaning and drying of many different types of surface. Excellent wet strength, resist tearing Highly absorbent Suitable for use with water based and solvent based cleaners Ca |
 |
| ESD Protected 3mm PCB Mounting LEDs |
Maplin |
A range of high efficiency, 3mm, PCB mounting LEDs with diffused lenses and a viewing angle of 30. The LEDs are mounted in a grey plastic housing and are suitable for pitches of 5 and 5.08mm. The LEDs offer ESD stability by means of a transparent plastic |
 |
| Extreme Brightness 5mm LEDs |
Maplin |
A range of 5mm extreme brightness LEDs with water clear lenses. The cathode is denoted by the shortest leg. All have a viewing angle of 20. Specifications: Order Code N72AJ: Mega Green Kingbright description: L-7113MGC Forward voltage max. IF |
 |
| Ferric Chloride Crystals |
Maplin |
A pack of Ferric Chloride (FeCl3) crystals for etching copper clad boards. Packet contains sufficient crystals to make one pint of solution. Dissolve in 250ml of warm water. Store and etch in plastic or glass vessels. With regular stirring, etching will t |
 |
| Ferrite Rings & Beads |
Maplin |
A range of ferrite rings & beads designed to cure electromagnetic & radio frequency interference at source. Always choose an internal diameter close to that of the cable or wind through several times. Always put ferrites at the noisy end of the |
 |
| Ferrite Rod Aerial |
Maplin |
A 127mm (5in.) long x 9.525mm (0·375in.) diameter ferrite rod onto which a medium wave and long wave coil are wound. Coils may be moved on rod for best performance (then fixed with a suitable adhesive). Inductance of medium wave coil: 370µ |
 |
| Flat Core Transformers |
Maplin |
Potted under vacuum Split bobbin winding Insulation class ta 70 CIB VDE/SEV 0570/EN61558/ENEC10 and UL/CSA-506 approved All types 2 x 115Vac input Specifications: Order No load Dimensions code Power Secondary voltage (mm) N11BA |
 |
| Flat Heatsink |
Maplin |
Plain undrilled aluminium heatsink ideal for printed circuit boards and suitable for external mounting on equipment.Dimensions: Width: 94mm (3·7in.); Length: 152mm (6in.); Thickness: 14mm (0·6in.).Temperature rise in centre of heatsink: 1·8C per |
 |
| Flexible Jumper Wires |
Maplin |
Packs of flexible jumper wires for use with our plugblocks. Wires are terminated in hard pins at each end, except Spade pack where each wire has a spade terminal on one end for use with terminal posts such as those on XX42V and FD32K. Wires are insulated |
 |
| Fluorescent Lighting Capacitors |
LCR Capacitors |
This range of capacitors is specially designed for series and parallel power factor correction of flourescent lamps. They are constructed with self healing metallised polypropylene dielectric. An attractive feature is the â??Quick Fit addition to the m |
 |
| Flux Dispensing Pen |
CircuitWorks® |
A pen for applying flux with precision and control. Chisel tip marker provides exact delivery of flux to surface Applies a patented noncorrosive, halide free, organic no-clean flux Flux meets Bellcore TR-NWT-000078 and IPC SF-818 for Surface Insulat |
 |
| Fluxed Silver Solder |
Maplin |
A pre-fluxed solder containing 5.5% silver that will provide the benefits of a lower resistance than normal with the added benefit of a lower melting point (220 - 230<+>o+>C). This gives an improved joint for higher quality hi-fi equipment |
 |
| Foam |
Maplin |
Conductive foam sheet 6mm thick in two densities. High density type is suitable for retaining ICs which may be simply pushed into the material and are held tightly in place. Low density type is very flexible for use as a packing material where static sens |
 |
| Foam Cleanser |
Maplin |
Advanced multipurpose foam cleanser Fast acting aqueous based cleaner Ideal for automotive upholstery Specially formulated for cleaning hard surfaces Use for cleaning and degreasing both vertical and horizontal surfaces Controlled break foam al |
 |
| For Case Style TO220 |
Maplin |
Black anodised heatsink with M3 thread for either vertical or horizontal mounting available in 3 different lengths. Order Length Temp. Rise Mounting Code mm °C/Watt RN77J 20 13.5 horizontal/vertical RN78K 35 12 |
 |
| For TO126(SOT32) & TO220 |
Maplin |
A black anodised, 37.5mm long heatsink with 1 x M3 thread for 1 semiconductor of the case style TO126(SOT32) or TO220. Temperature rise: 5.7oC/W |
 |
| For TO220,TO218(TOP3) |
Maplin |
A space saving, black anodised, 94mm long heatsink with 3 x M3 threads (for 3 semiconductors). |
 |
| Freezer Spray |
Maplin |
Quick and effective Easy to use Rapid evaporation Reduces surface temperature of electrical components to aid detection of overheating and similar faults Can be used to freeze water in small bore pipes to effect a repair avoiding the nece |
 |
| Fridge and Freezer Defroster |
Servisol |
Simplifies defrosting Removes the need to scrape or chip Saves time Also suitable for use on frozen car door locks Supplied in a 200ml aerosol can |
 |
| Gaffer Tape |
Maplin |
The famous duct tape, suitable for a multitude of applications including repairing polythene sheets, sealing boxes, binding and securing cables, bundling pipes, joining carpets, temporary repairs and the like. A strong, very tough, waterproof, cloth tape, |
 |
| Gas Torch Combination Kit |
Maplin |
A combination kit which incorporates a gas torch and includes the following accessories: pencil flame head, hot blower head, flat flame head, soldering head, four bits, hot knife, soldering iron sponge, reel of solder and storage box. This kit is ideal fo |
 |
| GCSE Component Pack |
Maplin |
An assortment of electronic components housed in a quality storage box intended for students following the GCSE courses in Electronics. The pack includes a wide selection of capacitors, resistors, transistors, diodes, ICs, LEDs and a stripboard for assemb |
 |
| General Purpose Crystals |
Maplin |
A range of crystals for use with microprocessors and other ICs.They are all supplied in HC-49/U style cans and have an adjustment tolerance of ±30ppm. Temp. Load Order Freq Stability Cap Code 1MHz ±50ppm 32pF RN12 |
 |
| General Purpose Crystals in U4 Style Case |
Maplin |
A range of crystals for use with microprocessors and other ICs. They are all supplied in U4 style cans and have an adjustment tolerance of ±30ppm.The crystals have a temperature range of -11 to +60oC. Temp. Load Order Freq Stability |
 |
| Giant Red LED |
Kingbright |
A giant round red LED made up from a group of six LEDs in a matrix with separate anodes and cathodes brought out to 12 PCB pins on a DIL matrix. Pins are placed at 2.54mm (0.1in.) intervals intwo rows of 6 pins each, spaced 15.24mm (0.6in.) apart. LED bod |
 |
| Glass Bonding Adhesive |
Bison |
NOTE: Not suitable for aquariums, laminated or safety glass. Optically clear bond Cures rapidly under direct sunlight Easy to dispense from a handy syringe Bond glass and crystal to themselves and metal Supplied in a 2ml tube |
 |
| Glass Cleaner |
Servisol |
Excellent glass and screen cleaner Produces a sparkling, smear free finish Pleasantly perfumed Ideal for use on televisions, monitors, computers, mirrors, cameras windows, windscreens, etc. Supplied in a 200ml aerosol can |
 |
| Gold-Plated PCB Terminals (Pin) |
Maplin |
Miniature gold-plated PCB terminals designed to be fitted to circuit boards to provide test points for voltage and waveform measurement. The terminal consists of a pin with protruding rings to position the terminal at the correct height and to prevent tes |
 |
| Gold-Plated PCB Terminals (Solder Bucket) |
Maplin |
Miniature gold-plated PCB terminals designed to be fitted to circuit boards to provide an anchorage point for lead-out wires. The terminal consists of a pin with a protruding ring to position the terminal at the correct height and a solder bucket for atta |
 |
| Handy Wrap |
Maplin |
A strong, clear, non-adhesive film for binding and securing items together. Also suitable as a protective wrapping. Using the included dispenser overlap and stretch the film tightly around the items to be bundled. Leaves no sticky residue when unwrapped. |
 |
| Hazard Tape |
Maplin |
This tape has an aggressive pressure sensitive adhesive, good abrasion resistance and conformability together with minimum creep-back. It is self-extinguishing if it catches fire. 50mm width 33m length Ideal for marking factory floors, gangways or |
 |
| Heatsink for 14/16-Pin ICs |
Maplin |
A black anodised finned heatsink for 14/16 pin DIL ICs. The heatsink may be attached using contact adhesive or similar. Heatsink compound should also be utilised. It has a length of 19mm and a temperature rise of 46°C/Watt. |
 |
| Heatsink for Case Style TO5/39 |
Maplin |
A push-fit lobe finned radiator constructed from pewter bronze with a black paint finish. Suitable for TO5/TO39 style cases. Temperature rise : 60C/Watt. |
 |
| Heatsink for Case Style TO5/TO39 |
Maplin |
Two push-fit, bright aluminium heatsinks for TO5/39 style devices. Order Height Temp. Rise Code mm °C/Watt RN65V 10 44 RN66W 8 55 |
 |
| Heatsink for TO220 |
Maplin |
A black anodised, 35mm long heatsink with an M3 thread for horizontal mounting. Temperature rise: 21oC/W. |
 |
| Heatsink for TO220 Style Cases |
Maplin |
Black anodised heatsink for TO220 cases which can be fixed using an M3 screw. |
 |
| Heatsink for TO3, TO66, SOT9 |
Maplin |
Black anodised heatsinks available in 2 lengths: RN75S: 37.5mm length RN76H: 50mm length |
 |
| Heat Transfer Compound |
Servisol |
This silicone free heat transfer compound is for use on electrical and electronic components that require improved thermal conductivity or the efficient dissipation of heat. It is supplied in 2ml, 10ml and 35ml syringes, which allows pin point application |
 |
| Heavy Duty Gaffer Tape |
Maplin |
A thicker, stronger, stickier version of the Rhino cloth gaffer tapes. It is recommended for the toughest of applications. Available in silver. 50mm x 50m rolls only. |
 |
| High Brightness |
Kingbright |
High Brightness10mm Diameter Types A high brightness 10mm diameter LED available in three colours. A panel mounting clip is available, sold separately. The cathode is denoted by the short lead. Specifications: Red Green Yellow Light output typical at |
 |
| High Brightness 3mW Laser Module |
Maplin |
A Class IIIA laser product capable of delivering an output of 3mW at a wavelength of 635nm (bright red), supplied complete with its own built-in regulator. Easy to set up, this module is ideal for general purpose laboratory and field operations or educati |
 |
| High Brightness Multi-Colour LED |
Kingbright |
A single, high brightness LED, encapsulated in a diffused white package with three leads, that can be made to emit light of any colour of the spectrum from green through to red. Available in 3mm and 5mm packages. They are common cathode which is the centr |
 |
| High Brightness Red Types |
Kingbright |
A high brightness red LED available in miniature and standard sizes. The LEDs fit the appropriate clips listed below. The cathode is denoted by the flat on the body and by the short lead. Specifications: Min Std Case size (dia.) 3mm 5mm Light output typ |
 |
| High Current Toroids |
Maplin |
made with a toroid core in iron powder (IP). It is designed primarily for use in switched mode power supplies, but can also be used as an RFI suppressor. The choke is designed and tested to EN138100 and EN60938-1 and also has VDE approval. Specifications: |
 |
| High Flux Batwing Luxeon Emitter LED |
Lumiled™ |
The Luxeon Emitter is the basic building block of all Luxeon power sources and enables you to design your own power source to your own specification. Typical applications include reading lights, mini accent lights, uplighters and down lighters, portable l |
 |
| High Flux Batwing Luxeon Star LEDs |
Lumileds™ |
Luxeon star hexagonal modules can be connected and powered in a close packed hexagonal configuration for tight spacing and increased light output per unit area. They are available in white, green, cyan, blue, royal blue, red and amber. Typical application |
 |
| High Flux Batwing Luxeon Star/O LEDs |
Lumiled™ |
Luxeon Star/O consists of a Luxeon emitter mounted to a square submount and includes PMMA secondary optics to create a tight collimated beam. They are available in white, green, cyan, blue, royal blue, red and amber. Typical applications include passenger |
 |
| High Flux Lambertian Luxeon Star/V LEDs |
Lumiled™ |
The Luxeon V series offers extreme luminous density, providing lumens per package of 4 times a standard Luxeon or up to 50 times that of alternative solid state light sources. They are available in white, green, cyan and blue. Typical applications include |
 |
| High Flux Luxeon 12 Ring LEDs |
Lumiled™ |
This Luxeon ring offers 12 emitters configured in circular geometry. The ring can be used separately or in combination (the small 6 ring fits inside the large 12 ring). It is perfect for enabling creative and stylish light fixtures and has PMMA secondary |
 |
| High Gain Opto Isolator 6N139 |
Siemens |
A high sensitivity, high speed split-Darlington opto isolator. Speeds up to 300kbit/s are possible. Specification Supply voltage (VCC): 5V (18V max) LED input current: 0·5mA (20mA max) Output current: 60mA max LED VFat IF = 0·5mA: 1 |
 |
| High Grade Audio Capacitors |
Maplin |
A range of very high quality audio grade capacitors with both 2 pin and 4 pin variants. For high grade audio equipment Ideal for VTR and CD players High resonance frequency Low ESR Low impedance Snap-in terminals Manufactured to ISO9001 st |
 |
| High Grade Polish |
Servisol |
Contains wax and silicone for a high gloss, durable finish Leaves a pleasant floral smell Smear free finish Ideal for use on cabinets, speakers, furniture, paintwork, metals and plastics Supplied in a 200ml aerosol can |
 |
| High Power Infrared Emitting Diode |
Maplin |
A high power infrared emitter, intended primarily forremote control applications. Encapsulated ina 5mm water-clear resin package. Cathode denoted by flat on package/shorter lead. Similar to TIL38. Absolute maximum ratings: Power dissipation: 100mW Forward |
 |
| High Power NPN |
Maplin |
High Power NPNSilicon TransistorsA range of high power, low frequency, silicon NPN transistors. Type Case VCEO VCBO VEBO IC PTOT hFE FT Style V V V A W Typ MHz BD131 TO126 45 70 6 3 15 >40 60 BD135 TO126 45 45 5 1 8 100 250 BD139 TO126 80 100 5 1 8 1 |
 |
| High Power Ultraviolet LED with Narrow Directivity |
Nichia |
Nichiaâ??s ultraviolet breakthrough comes in a metal can style case with a quartz window. This high power LED has a narrow directivity and typical applications are use in instruments and fluorescence excitation. Specifications: Absolute maximum |
 |
| High Sensitivity, High Voltage Opto Transistor Isolator CNY17-3 |
Maplin |
This opto isolator has a min transfer ratio of 100% and a 7500V peak isolation voltage (5300V rms). Pin-out is the same as WL35Q. Absolute maximum ratings: Input to output voltage: 7500V peak, 5300V RMS Collector-base voltage (V<->CBO->): 70 |
 |
| High Temperature Electronic Bonding Kit |
RiteLok |
The HT3000 kit comprises of 20g high temperature cyanoacrylate adhesive and 20ml of activator. Also included in the pack are 2 dispense nozzles to aid accurate application for the adhesive and a pump head spray. Designed specifically for the needs of the |
 |
| High Temperature Radial Electrolytic Capacitors |
Maplin |
A range of high temperature, miniature radial electrolytics offering excellent reliability and long life - up to 2000 hours at 105C. The capacitors are ideal for use in the output circuits of switching power supplies and other high temperature environmen |
 |
| High Voltage Opto Isolator 4N25 |
Maplin |
An opto isolator device in a 6-pin DIL package comprising a gallium arsenide infrared emitting diode optically coupled to a monolithic silicon phototransistor. The input to output isolation can be up to 7,500V peak guaranteed, and the device meets or exce |
 |
| High Voltage Radial Electrolytic Capacitors |
Maplin |
A compact 47µF 450V radial electrolytic ideal for valve circuits, repair of televisions, satellite equipment and videos. Specifications: |
 |
| High Voltage Resistor |
Maplin |
A range of high stability, low noise metal film resistors available in the following values: 1M ohms, 2M2 ohms, 4M7 ohms, 10M ohms 22M ohms, 33M ohms and 47M ohms. Specifications: Working voltage 1M - 33M: 2500Vac, 3500Vdc Working voltage 47M: 70 |
 |
| Hook and Loop Pads |
Maplin |
The hook and loop pads are perfect for holding items which have to be removed from time to time. Strong hook and loop fixing can be re-used thousand of times without deterioration of power. White pads 20mm x 20mm with a strong self adhesive backing. Stro |
 |
| HT9201A Tone Dialler |
Holtek |
A simple, low-cost tone dialler IC that can be used with a standard keypad and features a built-in voltage regulator and 1µA standby current. The device requires an external 3.58MHz crystal and an operating voltage of 2.0V to 5.5Vdc. Supplied in |
 |
| IC Extraction Tool |
Maplin |
A pair of plastic-coated, chrome-plated, sprung, steel tweezers with hooked ends for lifting and placing ICs without touching the pins. Overall length 102mm. |
 |
| IC Insertion Tool |
Maplin |
which makes inserting integrated circuits one simple operation. No more complicated alignment of pins or handling problems. A high quality tool |
 |
| ICL7611 |
Maplin |
Monolithic CMOS op-amp providing the designer with high performance operation at low supply voltages and selectable quiescent currents, and having ultra-low input and low power dissipation where required. The basic amplifier will operate at supply voltage |
 |
| ICL7660CPA Switched Capacitor Voltage Converter |
Maplin |
The ICL7600 is a monolithic, CMOS switched-capacitor voltage covert that will invert, double, divide, or multiply the input voltage. The device combines low quiescent current with high efficiency - typically 98%, plus on-chip oscillator control circuitry |
 |
| ICL7660SCPA CMOS Voltage Convertor |
Maplin |
The ICL7660S is a monolithic CMOS voltage convertor that guarantees significant improved performance over the industry standard ICL7660. The device has an extended operating supply range up to 12V, lower supply current, and requires no external diode. A f |
 |
| ICL8038CCPD |
Maplin |
Specifications: Supply voltage: 5-0-5V to 10-0-10V (e.g. 2 x PP3 batteries) Output impedance: 600 Ohms Output levels max peak-to-peak (VS = 7·5-0-7 |
 |
| ICM7224IPL 41/2-Digit Counter |
Maplin |
A 4½ -digit counter capable of directly driving an LCD display. The maximum count is 19,999, and the input frequency can be up to 25MHz typically. Chips can be cascaded to provide higher maximum counts. Specifications: Supply voltage: 5V (3V to 6 |
 |
| ICM7555IPA Low Power Timer Specifications: |
Maplin |
In astable mode the frequency of operation is given by: f = 1·46/[(RA + 2RB)C] Hz. Fig. 1 shows how to achieve duty cycles of 50% and less. In a monostable mode the period time is given by: t = 0·69RC sec. (In both equations R is in ohms and |
 |
| ICM7556IPD |
Maplin |
A single 14-pin DIL package containing two 7555 timers. The IC is pin-for-pin compatible with 556 timers. |
 |
| Infrared Detector E600STO |
Murata |
This device is a sensitive, low noise, pyroelectric infrared detector, which uses a ceramic ferroelectric dual sensing element, a silicon optical filter reduces the effect of RF interference. Characteristics at 25C: Sensitivity (500°K, 1Hz, 1Hz) |
 |
| Infrared Phototransistor |
Maplin |
A low cost, high quality NPN silicon phototransistor, having high illumination sensitivity, fast response timeand low dark current. Encapsulated in a 3mm water clear resin package.The collector is denoted by a flat on the package and the shorter of the t |
 |
| Infrared Transmitter/Receiver Diode |
Maplin |
An infrared transmitter diode and a matching receiver photo-transistor in side looking packages, ideal for mounting at the edge of a PCB or where beam break detection or data coupling is required. Maximum forward current for the diode is 100mA continuous, |
 |
| ISD1416P Voice Record/Playback |
ISD |
This single CMOS record/playback IC uses a patented multi-level storage system that allows voice and audio signals to be stored in non-volatile memory in their natural form. Direct analogue storage provides a very true, natural sounding reproduction of vo |
 |
| ISD2560P Voice Record/Playback |
ISD |
This single CMOS record/playback IC uses a patented multi-level storage system that allows voice and audio signals to be stored in non-volatile memory in their natural form. Direct analogue storage provides a very true, natural sounding reproduction of vo |
 |
| Jump Wire Kit |
Maplin |
A kit containing 14 different length jumper wires for use with our plugblocks. Wires are stripped and formed at 90 at each end. There are 25 wires of each length: 2·54mm (0·1in.) uninsulated, 58mm (0·2in.), 7·62mm (0·3in.), 10·16mm (0 |
 |
| K8048 PIC Microcontroller Programmer Kit |
Maplin |
· Suitable for programming Microchip□ FLASH PIC microcontrollers · Supports 4 different 300 mil. PICs: 8p, 14p, 18p and 28p · Test buttons and LED indicators to carry out educationa |
 |
| K x 8 bit High Speed CMOSSRAM |
Maplin |
The UT611024 is particularly suited for use in high density, high speed system applications. Fast access time - 12/15nS max. Low operating power - 100mA (typical) Single 5V power supply All inputs & outputs TTL compatible Fully static operati |
 |
| L200C Adjustable Voltage and Current Regulator |
Maplin |
A monolithic IC for adjustable voltage (up to 36V) and current (up to 2A) regulation. It has current and power limiting thermal shutdown and input over voltage protection up to 60V. The device can be used to replace fixed voltage regulators where high out |
 |
| L296P 4A Power Switching Regulator |
Maplin |
A switch-mode voltage regulator capable of delivering between 5·1V and 40V at 4A maximum. The device features soft start, programmable current limiting, thermal protection, remote inhibit, a reset output for microprocessors and a PWM comparator input f |
 |
| L6203 |
Maplin |
An 11-pin flat package IC with mixed bipolar, CMOS and DMOS technology. The IC can deliver 3A output current at supply voltages up to 52V with very high efficiency and fast switching speed. Each side of the bridge is controlled by a separate logic input, |
 |
| Label Remover |
Maplin |
For the removal of adhesive labels A non-CFC spray Supplied in a 200ml can. |
 |
| Label Remover |
Servisol |
Quickly neutralises the adhesion of labels Cleans sticky residue left by previous labels Ideal for use on photocopiers, fax machines, computers, printers, etc. Is also an effective cleaning solvent for some inks and dyes Pleasant citrus smell Su |
 |
| LCD Panels |
Maplin |
A range of LCD panels with static driving method, DIL contacts and a pitch of 2.54mm. Order Code N20AZ has a low battery signal on the display. Specifications: Order Code Digits Digit Height Glass size N18AZ 2 12.7mm 38 x 30mm N19AZ 3.5 |
 |
| LD271 Infrared Emitter <I> |
Siemens |
An infrared emitting diode that emits radiation in the near infrared range(950nm peak). The emitted radiation, which can be modulated, is generated by forward flowing current. The deviceis enclosed in a 5mm plastic package and has a lightly diffused grey |
 |
| Lead Free Solder |
Maplin |
A lead free alloy solder containing a non- corrosive flux. This solder is 99.3% tin & 0.7% copper. We recommend this solder for use with the iron-clad and nickel-clad bits supplied with our soldering irons. Solder is available in 1mm 100g, 250g & |
 |
| LED Chrome Bezel |
Maplin |
A smart, panel mounting, chrome bezel for standard 5mm (0.2in.) size round LEDs. The bezel requires a single hole 7.5mm (5/16in.) diameter and is secured by a nut and lock--washer. The bezel has a removable PVC grommet at the rear which has two holes to t |
 |
| LED Clips |
Maplin |
Panel mounting clips to suit 3mm, 5mm, 8mm and 10mm round LEDs. The following types are available: Panel cut-out Bezel size Overall (diameter) (diameter) length 3mm Clip 4·4mm 6mm 5mm 5mm Clip 6.35mm 8mm 6.8mm 5mm Clip Conve |
 |
| LED Covers |
Maplin |
A range of coloured covers for use with 3mm and 5mm LEDs, which also serve to clip the LED onto the front panel. The covers increase the viewing angle to 180o and give a finished appearance. They have a flat top marked with Fresnel rings and striated line |
 |
| LED Kit |
Kingbright |
A selection of 3mm, 5mm, 8mm and 10mm LEDs in standard colours supplied in a plastic case. Includes round, rectangular, PCB mounting and side looking LEDs, as well as two seven-segment displays. Comprises 44 parts in total. |
 |
| LED Tester |
Maplin |
With the aid of this test module it is possible to carry out tests with all types of light emitting diodes in order to check function, brightness, colour and polarity. The LEDs can be tested with different currents: approx. 1mA, 2.5mA, 5mA, 10mA, 20mA and |
 |
| LF351N, LF353N & LF347N |
Maplin |
Low-cost high performance JFET input op-amps that will directly replace and out-perform the 741 in most applications. The devices are low noise, have distortion figures of less than 0.02% over the audio band, high slew rate (13V/µs), high input |
 |
| Light Dependent Resistors |
Maplin |
A range of light dependent resistors with a power dissipation of 90mW. All types have a maximum voltage rating @0lux of 150V, except Order Code N50AY, which has a maximum rating of 300V. Order Codes N51AY and N52AY have a peak wavelength of 530nm. The pea |
 |
| LIne Marking Tape |
Maplin |
Used to mark factory floors, gangways, etc. 50mm wide, supplied in a 33m roll Available in black, green, blue, red, white and yellow |
 |
| Livewire Circuit Simulator |
Maplin |
Livewire is a circuit simulator that uses animation to analyse and demonstrate the principles of electronic circuits. Switches, resistors, transistors, diodes, bulbs, buzzers and integrated circuits can all be connected together to investigate hidden conc |
 |
| LM13700N |
Maplin |
The 13700 is a dual operational transconductance amplifier with linearising diodes and buffers. It consists of two current controlled transconductance amplifiers, each with different inputs and a push pull output. The two amplifiers share common supplies, |
 |
| LM1881N Video Sync Separator |
Maplin |
The IC can extract the timing information from PAL, SECAM or NTSC encoded video signals having standard negative going sync and amplitudes from 0·5V to 2V. The IC outputs the composite sync, vertical sync, burst/back porch timing and an odd/ even field |
 |
| LM2577 Step-Up Voltage Regulator |
Maplin |
The 2577T is a step-up regulator device finding many applications in flyback and forward convertor switching regulation. A typical arrangement requires only a few external components to realise a working design. Using existing value inductors and flyback |
 |
| LM2917N Frequency to Voltage Convertor |
Maplin |
The 14-pin DIL IC is extremely easy to use since V<->OUT-> = F<->IN ->x V<->CC-> x VR1 x C2 where VR1 is the resistance between pin 3 and ground and C2 is the capacitance (in Farads) between pin 2 and ground. Fe |
 |
| LM2940CT 1A Low Dropout Regulator |
Maplin |
A positive voltage regulator that can source 1A of output current with a dropout voltage of typically 0·5V and a maximum of 1V, over the entire temperature range. A quiescent current reduction circuit has been included which reduces the ground current |
 |
| LM301AN |
Maplin |
A general purpose op-amp featuring low input currents and low temperature drift on input currents. The amp is overload protected on input and output with no latch-up when the common mode range is exceeded. External compensation capacitor (33pF approx) is |
 |
| LM311N |
Maplin |
A voltage comparator that has input currents more than a hundred times lower than the 710. It will operate on ±14V or +5V supplies and will drive RTL, DTL, TTL, MOS and switch voltages up to 40V at currents as high as 50mA. Both input and outpu |
 |
| LM317 3-Terminal Adjustable Voltage Regulators |
Maplin |
The LM317 is an adjustable, positive, 3-terminal voltage regulator capable of supplying 100mA (LZ type), 500mA (MP type) or 1·5A (T type) over a 1·2V to 37V output range. Both line and load regulation are better than standard fixed regulators. Full |
 |
| LM324N 324 |
Maplin |
Independent, high-gain, internally frequency compensated op-amps specifically intended to operate from a single power supply over a wide range of voltages. Application areas include transducer amplifiers, DC gain blocks and all conventional op-amp circuit |
 |
| LM334N Adjustable Current Source |
Maplin |
This IC in a TO92 package is a 3-terminal adjustable current source with a 10,000 to 1 range in operating current, excellent current regulation and a wide dynamic voltage regulation of 1V to 40V. Current is established with one resistor connected between |
 |
| LM335Z Precision Temperature Sensor |
Maplin |
An easily calibrated, precision temperature sensor, whose operation is similar to a zener diode. The device has a breakdown voltage directly proportional to absolute temperature and has a linear output equal to 10mV/C. The device operates over a current r |
 |
| LM337 3-Terminal Negative Adjustable Regulator |
Maplin |
An adjustable, 3-terminal, negative voltage regulator capable of supplying 100mA (LM337LZ) or 1·5A (LM337T) over a range of â?"1·2V to â?"37V. It is exceptionally easy to use and requires only two external resistors to set th |
 |
| LM339N |
Maplin |
Four independent precision voltage comparators with a typical input offset voltage of 2mV, and designed to operate from a single power supply. The input common-mode voltage range includes ground, even though operated from a single power supply voltage. Id |
 |
| LM348N |
Maplin |
A low power, quad version of the 741 op-amp featuring high gain and internal compensation with a total supply current requirement for the IC that is less than a single conventional 741. Each op-amp has a class AB output stage and so has virtually no cross |
 |
| LM358N |
Maplin |
Independent high-gain internally frequency compensated op-amps designed specifically to operate from a single power supply. The output voltage can swing to ground even on single rail power supplies. Channel separation 120dB. |
 |
| LM35 Precision Centigrade Temperature Sensors Characteristics (typical) |
Maplin |
±0.6°C (DZ) -40°C to +110°C ±0.8°C (CZ) 0°C to +100°C ±0.9°C (DZ) Non-linearity: 0.2°C Sensor slope: +10mV/ |
 |
| LM380N |
Maplin |
An audio amp in a 14-pin DIL package that requires very few external components to make a complete 2·5W power amplifier. In most cases, however, it is advisable to add a Min Res 2·7 ohms and Polyester 0·1µF in series from pin 8 to groun |
 |
| LM386N-1 |
Maplin |
A power-amp designed for use in low voltage, especially battery-operated, applications, such as AM-FM radios, portable tape cassettes, intercoms, power invertors, etc. For minimum parts count, C1 and C2 can be omitted. With pins 1 and 8 open circuit the g |
 |
| LM3900N |
Maplin |
Four dual input, internally compensated amplifiers designed primarily for single power rail operation. These current differencing amplifiers use a current mirror to achieve the non-inverting function. When driving from a low impedance source a resistor sh |
 |
| LM3914/5 Bargraph Displays |
Maplin |
An LED driver that will sequentially light ten LEDs when a gradually increasing voltage is applied to pin 5, (dot mode) or in bar mode all LEDs indicating voltages below input are lit. In dot mode there is a slight overlap so that at no point are all LEDs |
 |
| LM393N |
Maplin |
An independent precision voltage comparator designed specifically to operate from a single power supply over a wide range of voltages. Operation from split rails is possible and the low power supply current drain is independent of the magnitude of the pow |
 |
| LM723C Variable Voltage Regulator Formulæ for Various Output Voltages Outputs fr |
Maplin |
|
 |
| LM741CN |
Maplin |
The industry standard general purpose op-amp featuring internal frequency compensation. The amp is overload protected on input and output with no latch-up if common mode range is exceeded. |
 |
| LM837N |
Maplin |
A quad op-amp designed for low noise, high speed and wide bandwidth performance. The output can drive a 600 ohms load and is ideal for digital audio, graphic equalisers, pre-amplifiers and professional audio applications. It can be used to upgrade existin |
 |
| Low-Current Optocoupler SFH618-2 |
Siemens |
A transistor optocoupler in a DIP-4 package with a low current input and a very high coupling transfer ratio (CTR), typically 120%. The device has good CTR linearity relative to forward current and a high VCEO of 55Vdc. The device can be â??end stacked |
 |
| Low Frequency Choke |
Maplin |
A high value LF choke with a laminated steel core of separate â??Eâ?? and â??Iâ?? stacks separated by a paper insulator to minimise saturation. Designed for main line supply smoothing in HT valve power supplies. Inductance value is nominally |
 |
| Low Power LF NPN Transistors TO39 Case |
Maplin |
A range of low power, low frequency, silicon transistors in T039 style cases. |
 |
| Low Power LF NPN Transistors TO92 Case |
Maplin |
A range of silicon transistors in a TO92 style case. Type VCEO Ic PTOT hFE FT V mA mW min/max MHz PH2369 15 200 500 40/120 500 BC338 25 500 625 350 200 MPS3904 40 100 300 100/300 180 2N3 |
 |
| Low Profile Can Solder Tagged Electrolytic Capacitors |
Maplin |
A range of low-profile, can-type electrolytic capacitors offering long life and stability. The capacitors feature etched aluminium foil, non-inductively wound with impregnated electrolytic tissue. |
 |
| M66T Simple Melody |
Maplin |
M66T Simple MelodyGeneratorA low power CMOS LSI device for generating tunes for melody cards, toys and other novelty devices. The built-in oscillator and powerful driving capability minimises the number of external components required. In fact, all that i |
 |
| Make Me an Offer 2! |
Maplin |
Buy at individual prices, or make us an offer!, If you would like to buy in bulk, email the codes and quantities you wish to purchase to: claire.mchale@maplin.co.uk |
 |
| MAX202 RS232 Transceivers |
Maplin |
The MAX202 transceiver is designed for RS232 and V.28 communication interfaces where a ±12V supply is not available. On-board charge pumps convert the +5V input to the ±10V needed for RS232 output levels. The drivers and receivers me |
 |
| MAX232CPE RS-232 Transmitter/Receiver |
Maplin |
A dual RS-232 receiver/transmitter that meets all the EIA RS-232C specifications while requiring only a single +5V supply. This significantly simplifies system design by removing the need to provide power supply voltages other than +5V. The IC has two on- |
 |
| MAX233CPP +5V Powered RS-232 Driver/Receiver |
Maplin |
The MAX233 is a 2-line driver/receiver IC intended for all EIA/TIA-232E and V.28/V.24 communication interfaces, especially where no ±12V supply is available. The device includes on-board voltage convertors that require no external capacitors, w |
 |
| MAX3232CPE 3V/5V RS232 Transceiver |
Maplin |
The MAX3232CPE has a proprietary low-dropout transmitter stage enabling true RS232 performance from 3V to 5.5Vdc supplies. The internal power supply consists of a regulated dual charge pump that produces output voltages of +5.5V and -5.5V, from an input |
 |
| MAX4427CPA Dual High-Speed MOSFET Driver |
Maplin |
The MAX4427 is a dual non-inverting monolithic power MOSFET driver, designed to convert TTL/CMOS inputs to high voltage/current outputs. Delay times are virtually independent of VDD, and the high current output drivers rapidly charge and discharge the gat |
 |
| MC1458CN |
Maplin |
Two 741 op-amps in one 8-pin DIL package. The two amps share a common bias network and power supply leads, but otherwise are completely separate. Channel separation: 98dB at 1kHz. |
 |
| MC1496P Double-Balanced Modulator |
Maplin |
The MC1496P is a double-balanced modulator/ demodulator. The circuit produces an output voltage which is the product of an input voltage (signal) and a switching function (carrier). Communications applications include modulation and demodulation of AM, SS |
 |
| Metal Epoxy |
Bison |
Excellent for a wide range of bonding or repair applications on metal surfaces, examples of which include filling drilled holes, surface cracks and smoothing worn surfaces. It can be filed and drilled after the adhesive has fully cured. Excellent chemical |
 |
| Metal Film 2W Resistor |
Maplin |
A very high quality metal film resistor that is physically the same size as the 1W resistor, yet has a superior specification. Specifications: Working voltage: 500V Tolerance: ±1% Power rating: 2W at 70°C Temperature coeff |
 |
| Metallised Ceramic Plate Capacitors |
Maplin |
A miniature ceramic capacitor with a cement-coated case. Values up to and including 220pF are suitable for temperature compensation in tuned circuits where low losses, close tolerance and high stability are required. Values from 270pF to 4700pF are for |
 |
| Metallised Polyester Film Capacitors |
Maplin |
These capacitors consist of a low-inductive wound cell of metallised (PETP) film. They are designed for use on PCBs for coupling and decoupling applications. Dielectric: Polyethylene terephthalate film Capacitor electrodes: Vacuum-deposited aluminium |
 |
| Metallised Polypropylene Capacitors |
LCR Capacitors |
A high quality metallised polypropylene capacitor specially designed for use at very high continuous AC or DC voltages. Use at 250Vac mains. Specifications: Tolerance: ±5% Working voltage: 1000Vdc, 500Vac Dissipation factor: 0.001 |
 |
| Micro-Jet Gas Torch |
Iroda |
A self-igniting gas torch offering the ultimate in portability. This unit runs solely on butane gas and is refilled by simply buying a disposable lighter. Ideal for the hobbyist, electrician, repair person and DIY expert. Supplied with full operating inst |
 |
| Microphone Transformer |
Maplin |
A transformer specially designed to match low impedance balanced or unbalanced microphones into unbalanced high impedance inputs. Turns ratio: 7:1 Input impedance: 300-0-300 Ohms (600 Ohms) Output impedance: 20k Ohms Frequency response: 50H |
 |
| Miniature 250mA |
Maplin |
A range of small transformers that are wire ended. All types have a 250mA output, centre-tapped. All primaries are 0 to 240V. Available in 6V, 9V, 12V and 15V types. Type Secondary Size(WxHxD)* Fixing Centres 6V 6-0-6V 36 x 31 x 34mm |
 |
| Miniature 7mm Radial Electrolytic Capacitors |
Maplin |
A range of sub-miniature capacitors offering size, tolerance and leakage current similar to tantalum bead. Designed for direct mounting on PCBs. Tolerance: ±20% Temperature range: -40°C to +85°C Cap Working Case Size |
 |
| Miniature Audio Transformers |
Maplin |
Two economically priced miniature transformers for audio matching. Dimensions 20 x 16 x 15mm. (CT = Centre tapped). Output type 200mW. Type No. Application Primary Secondary impedance impedance LT44 Min TR LT44 Driver 20k Ohms 1k OhmsCT |
 |
| Miniature Dual Gang Potentiometers |
Maplin |
A range of dual miniature slide track carbon potentiometers with printed circuit board mounting terminals. Potentiometer measures 60mm long x 9mm wide with a 45mm track length. Height above PCB (excluding slide tang) 6·5mm. The pin spacing is not compa |
 |
| Miniature Film Dielectric Trimmers |
Maplin |
A miniature trimmer sturdily constructed on a plastic frame. The dielectric is arranged so as to support the vanes giving a very high degree of stability. Adjustment is by means of a screwdriver slot in the upper face. Working voltage: 100Vdc Insula |
 |
| Miniature Infrared Source |
Maplin |
A gallium arsenide infrared LED with a peak spectral wavelength of 940nm. Encaspulated in a 3mm water-clear resin package. Cathode denoted by flat on package/shorter lead. Similar to TIL32 Absolute maximum ratings: Power dissipation: 80mW Forward current |
 |
| Miniature PCB Mounting LEDs |
Maplin |
A range of high efficiency, miniature, PCB mounting LEDs with diffused lenses and a viewing angle of 38. The LEDs are mounted in a plastic housing and are suitable for pitches of 5 and 5.08mm. The LEDs are offered in dual, single, triple and quad line ver |
 |
| Miniature Potentiometers |
Maplin |
rotary carbon track potentiometers with printed circuit board mounting terminals. Fixing hole required: 7mm. Power rating: 0·2W linear, 0·1W log. Max voltage: 200V linear, 150V log. Overall shaft length 25mm. Linear types are marked â??B |
 |
| Miniature Resistors 1k - 100k |
Maplin |
Miniature Resistors 1k - 100k |
 |
| Miniature Resistors 1R - 1K |
Maplin |
Miniature Resistors 1R - 1K |
 |
| Miniature Resistors greater than 100k |
Maplin |
Our range of miniature resistors having a value of 100k - 10M |
 |
| Min/Max Temperature Module |
Maplin |
A maximum/minimum digital thermometer module with the LCD display and circuitry on a small PCB with a 16-way solder edge connection. The PCB is fixed to a small plastic bracket that houses the battery. The module has an onboard temperature sensor or an ex |
 |
| MK484 Tuned RF Radio IC |
Maplin |
In 1970 Ferranti started the development of a single-chip AM tuner and by 1973 it became widely available for use. The 414 is no longer in production, but a follow on IC, the MK484 recently became available and incorporates essentially the same features. |
 |
| Modular Connectors |
Maplin |
Single row modular 2·54mm pitch sockets and matching plugs, which are intended for mother- daughter board applications. The shrouded socket is fitted with a highly reliable four leaf gold on beryllium copper contact and is also suitable for use with IC |
 |
| Motor Run Capacitors |
LCR Capacitors |
This range of capacitors is constructed with self healing metallised polypropylene dielectric and is encapsulated in a non flammable plastic case.They are very stable and offer high capacity in a small case. Suitable for use with single-phase induction mo |
 |
| Motor Suppressor |
LCRCapacitors |
In a delta suppressor, capacitors are connected between the live, neutral and earth terminals. As the frequency of the R.F.I. rises, the impedance of these capacitors falls thus attenuating the R.F.I. at the mains terminal. It can be used for radio suppre |
 |
| Moving Iron Meters |
Maplin |
A range of modern styled panel meters which have a transparent plastic cover and a white base. The coil is exposed at the rear and a set zero adjustment is not provided. The following types are available. Range Internal Scale marked Resista |
 |
| Multilayer Metallised Polyester Film Capacitors |
Maplin |
A range of multilayer metallised polyester film capacitors that are epoxy resin sealed in a flame-retardant thermoplastic case (UL94VO). These low-cost capacitors have a high CV to volume ratio and are highly reliable and stable over a very wide temper |
 |
| Multi-LED Arrays |
Kingbright |
A unique range of 2-way and 3-way end-stackable LED arrays available in red, green and yellow, enabling multiple arrays of any number of segments with the same or various colours to be assembled. The housings are black and designed to push fit into a pane |
 |
| Mylar Film Capacitors |
Maplin |
A range of general purpose capacitors supplementing the other film and foil capacitor ranges in this catalogue. They are inductively wound and have an epoxy resin coating. Tolerance: ±10% Working voltage: 100Vdc Temperature range: -4 |
 |
| N-Channel Power MOSFETs |
Maplin |
Type Case PTOT VDS VGS ID YFS i/p IDSS Style max max max max cap max W V V A ms pF µA BUZ10 P1d 70 50 ±20 20 3000 550 250 BUZ11 P1d 75 50 ±20 30 8000 2000 250 VN66A |
 |
| NE5532N |
Maplin |
A dual op-amp designed for use in high quality and professional audio equipment. The IC has a typical input noise voltage at 1kHz of 5nV/vHz. In addition it has better output drive capabilities and much higher small signal and power bandwidths than most o |
 |
| NE5534AN |
Maplin |
A high performance, low noise op-amp especially suited for professional and high quality audio equipment, as well as instrumentation and control circuits, and telephone channel amplifiers. Compared to standard 741/TL081 op-amps, the device offers better n |
 |
| NE555N Timer |
Maplin |
The 555 is a highly stable device for generating accurate time delays or oscillation. Additional terminals are provided for triggering or resetting if desired. In the time delay (monostable) mode of operation the time is precisely controlled by one extern |
 |
| NE556N Dual Timer |
Maplin |
The 556 is a single 14-pin DIL package containing two 555 timers. |
 |
| NJM4558 |
Maplin |
A 741 op-amp on a monolithic chip, which offers excellent channel separation. Especially suited for differential amplifiers, as well as potentiometric amplifiers and applications where gain and phase matched channels are particularly required. Supplied in |
 |
| Non-Polarised Electrolytic Capacitors |
Maplin |
A range of non-polarised electrolytic capacitors primarily intended for use in loudspeaker crossover networks, but also suitable for use in applications where a large capacitance is required in a compact case with a large bipolar signal Specifications: |
 |
| One Piece Semiconductor Insulators |
Maplin |
Two semiconductor insulators moulded with bushes, that provide better heat transfer than mica and plastic with silicone grease. Simple and easy to install. The insulators are available in two sizes; TO220 and TO3. |
 |
| Opto Transistor Isolator |
Maplin |
Optically coupled infrared emitting diodes and phototransistors in dual-in-line packages. Single type is in a 6-pin DIL package, dual type is in an 8-pin DIL package and quad type is in a 16-pin DIL package. On the single type, a base lead is provided so |
 |
| Opto Triac Isolator MOC3020 |
Maplin |
An optically coupled gallium arsenide infrared emitting LED and triac in a 6-pin DIL package. The triac has a 400V rating (suitable for 240Vac mains) and IT rms of 100mA maximum. Characteristics: Forward voltage (VF) at IF = 30mA: 1·3V Continuous |
 |
| Opto Zero-Crossing Triac Isolator MOC3041 |
Maplin |
An optically coupled gallium arsenide infrared emitting LED and zero-voltage crossing triac in a 6-pin DIL package. The triac has a 400V rating (suitable for 240Vac mains) and IT rms of 100mA maximum. Forward voltage (VF) at IF = 30mA: 1·3V LED c |
 |
| Overcoat Pen |
CircuitWorks® |
A pen dispenser for precise application of a tough protective acrylic conformal coating. Protects conductive pen (Order Codes N73AA and N74AA) traces Repairs permanent solder mask Protects against shorting, arcing, abrasion and moisture Dries in |
 |
| Panel Indicator LEDs |
Kingbright |
A range of panel indicator LEDs with flat tops mouldedin various shapes:rectangular, square,cylindrical, triangularand arrowhead. The LEDs are designed to press-fit into panels etc. Specifications: All shapes (typical ratings) Colour Light Forward P |
 |
| Paper Masking Tapes |
Maplin |
A general purpose masking tape with a sticky backing, ideal for protecting windows, skirting board and other areas prior to painting, spraying, etc. Available in four widths of 50m roll lengths. Order Code Width Length DF17T 19mm 50m DF18U 25m |
 |
| Parcel and Packaging Tape |
Maplin |
A strong, brown polypropylene film with a good strength adhesive makes this the ideal packing tape for carton sealing. It is supplied on a 48mm x 50m roll. |
 |
| PCB Cleaner |
Servisol |
Formulated to remove flux residues from PCBs and electronic components Evaporates completely Supplied in a 200ml can |
 |
| PCB Cleaner |
Maplin |
Highly efficient cleaning solvent Cleans and protects Ideal for the removal of stains, coatings, printing inks, oil, grease and dirt Also ideal for removal of flux residues Low toxicity, leaves no residue Does not cause corrosion of metal |
 |
| PCB Etch Powder |
Maplin |
This sodium persulphate based etch powder has been specifically developed for etching copper laminate used in the electronics industry. The product exhibits excellent stability in use leaving surfaces clean, even and free of staining. 1kg will make 5 litr |
 |
| PCB Lacquer |
Servisol |
Protective coating for PCBs and electronic components Protects against humidity, air pollution and environmental damage Film can be soldered through to facilitate â??spot repairs Operational to 200C Recommended solvent for removal is Coldklene |
 |
| PCB Lacquer |
Maplin |
Fast drying acrylic coating Acid and alkali resistant Multi application Seals printed circuitry Use for over-lacquering of metal and paintwork Ideal as a waterproof coating for maps and technical documents Supplied in a 200ml can |
 |
| PCB Mounting 5mm LEDs |
Kingbright |
PCB mounting LEDs with diffused coloured lenses giving a very wide viewing angle of 160. The LEDs are mounted in a black plastic housing and viewed from the front the cathode is the right-hand lead. Red Green Light output typical at IF = 20mA 20m |
 |
| PCB Stand |
Maplin |
A PCB holder ideal for prototype work or for the electronics enthusiast. The frame holds PCBs up to a maximum length of 250mm, which can be rotated and fixed in any position through 360. The stand enables assembly and rework of many types of circuit at an |
 |
| PCB Starter Kit |
Maplin |
A comprehensive kit of parts to produce professional looking PCBs easy and quickly. The kit includes the â??Press-n-Peelâ?? transfer system for marking out the boards prior to etching. Full instructions included. Kit contents: 1 pack assorted sin |
 |
| PCB Wizard 3 Printed Circuit Board Design Software |
Maplin |
PCB Wizard is a highly innovative package for designing printed circuit boards. It provides a comprehensive range of tools covering all the traditional steps in PCB production: schematic drawing, schematic capture, component placement, auto-routing and fi |
 |
| P-Channel Lateral Power MOSFETs |
Maplin |
This range of MOSFETs are primarily intended for high quality audio applications and are designed to be used as complementary pairs. The lateral construction results in high resistance to electrical destruction, ultra-fine architecture for uniform power d |
 |
| Photodiode |
Maplin |
A high speed PIN photodiode designed to operate in the reverse biasmode. It offers low capacitance with high speed and high photosensitivity.The photodiode chip is moulded in a 5mm half round black infrared transmissive plastic package. This device is in |
 |
| Photo Reflector SY-CR102 |
Maplin |
A photo emitting diode and a phototransistor housed in a compact package that can be used for counting, rotational speed etc. The device has a very fast rise/fall time - just 1ms. Specification (IF=20mA, ICE=1mA, VCE=5V) Photocurrent (RL=20k): 230&am |
 |
| PIC12C508/509 |
Microchip |
The PIC12C508/509 series fits perfectly in applications ranging from personal care appliances and security systems to low-power remote transmitter/receivers. PIC12C509/JW is also for use with PIC12C508 range. Part Bytes OTP/ RAM I/O Speed Packages |
 |
| PIC16C5X |
Microchip |
The PIC16C5X series fits perfectly in applications ranging from high-speed automotive and appliance motor control to low-power remote transmitters/receivers, pointing devices and telecom processors. Part Bytes OTP/ RAM I/O Speed Packages Fla |
 |
| PIC16F62X |
Microchip |
Interrupt capability 8-level deep hardware stack 15 I/O pins with individual direction control 16 Bytes of common RAM Brown Out Detect (BOD) Selectable oscillator options Wide operating voltage: 3V to 5.5V Device Flash RAM EEPROM P |
 |
| PIC16F7X |
Microchip |
Up to 8K x 14 words of FLAS program memory Up to 368 x 8 bytes of data memory (RAM) Pinout compatible to PIC16C73B/74B/76/77 Pinout compatible to PIC16F873/874/876/877 Interrupt capability (up to 12 sources) 8 level deep hardware stack In-Circ |
 |
| PIC16F870/871 |
Microchip |
2K x 14 words of FLAS program memory 128 x 8 bytes of Data Memory (RAM) 64 x 8 bytes of EEPROM Data Memory Pinout compatible to PIC16CXXX 28 and 40 pin devices 8 level deep hardware stack In-Circuit debugging via 2 pins Wide operating voltag |
 |
| PIC16F872 |
Microchip |
2K x 14 words of FLAS program memory 128 x 8 bytes of data memory (RAM) 64 x 8 bytes of EEPROM data memory Pinout compatible to PIC16C72A Interrupt capability (up to 10 sources) 8 level deep hardware stack In-Circuit debugging via 2 pins Wid |
 |
| PIC16F87X |
Microchip |
Part Bytes OTP/ RAM I/O Speed Packages Flash Bytes Ports MHz Words 16F873 7168 4096 x 14 192 22 20 28SP 16F874 7168 4096 x 14 192 33 20 40P 16F876 14336 4096 x 14 368 22 20 28SP 16F877 14336 4096 x 14 36 |
 |
| PIC16F8X |
Microchip |
The PIC16F8x fits perfectly in applications ranging from high speed automotive and appliance motor control to low-power remote sensors, electronic locks, security devices and smart cards. The Flash/EEPROM technology makes customisation of application pro |
 |
| PIC17C44 |
Microchip |
The PIC17C44 fits perfectly in applications ranging from precise motor control and industrial process control to automotive, instrumentation, and telecom applications. The PIC17C44 is required for upgrading firmware on the PICSTART Plus Development System |
 |
| PIC In Practice |
Maplin |
PIC in Practice is a graded course based around the practical use of the PIC microcontroller through project work. Principles are introduced gradually, through hands-on experience, enabling students to develop their understanding at their own pace. This b |
 |
| PIC Introductory Course |
Butterworth |
Demystifies the leading microcontroller for students and technicians Emphasis on putting the PIC to work, not theoretical microelectronics A practical introduction to the world of microcontrollers |
 |
| Pipemaster |
Antex |
A unique new product from Antex which makes central heating fitting quick and easy. Allows Yorkshire-type capillary fittings and end-feed capillary fittings to be soldered without the use of a blow-torch. This is particularly useful when working in roof s |
 |
| Plastic Adhesive |
Bison |
This plastic adhesive is suitable for bonding most hard plastics, providing a strong resiliant joint, which is resistant to many solvents. Bonds rigid PVC, ABS and Perspex Transparent bond Resistant to household chemicals Super fast curing Suppli |
 |
| PLCC Sockets |
Maplin |
Very high quality sockets for ICs packaged in PLCCs (plastic leaded chip carriers). Tin-plated phosphor- bronze pins with gold-plated contacts. One corner is chamferred for polarisation. Pin length: 3.5mm Height above pcb: 8mm Socket size 44-pi |
 |
| Polishing Block |
Maplin |
Block is ultrafine non-metallic polishing compound bonded in an elastic material which wears evenly. It cleans, degreases and polishes in one clean simple procedure, totally eliminating the need for abrasive pastes, water washes and solvent washes. It has |
 |
| Polyester Layer Capacitors |
Maplin |
A range of self-healing polyester layer capacitors with a polyethylene-pterephthalate dielectric. Designed specifically for use on printed circuit boards, they offer high values of capacitance in extremely small case sizes and have low inductance and low |
 |
| Polyolephin Primer |
RiteLok |
A range of materials are generally considered difficult to bond with adhesives. Such materials include polypropylene, polyethylene, PTFE and silicone rubber. By applying the primer to the surfaces to be bonded, an excellent adhesive shear strength is obta |
 |
| Portable UK to USA Auto Transformers |
Maplin |
Allows you to operate USA equipment in the UK Robust desktop ABS housings Portable Thermal fuse protection Output sockets UL/CSA listed Specifications: Input voltage: 230Vac/50Hz Output voltage: 110Vac (Rated) Order Rated output Rate |
 |
| Positive Photoresist Aerosol Spray |
Maplin |
An aerosol can of positive photoresist for coating copper-clad board. To use, first use a fine grade emery cloth or polishing block to remove dust, dirt, grease, fingermarks and oxide from the copper surface. Rinse well and dry thoroughly. The coating mus |
 |
| Potting Compound PX700K |
Robnorganic |
Encapsulate your circuits to make them damage and moisture proof. Our potting compound packs are available in five different sizes to minimise wastage. Final mix is black. All resins get hot as they are curing, but where delicate electronic components are |
 |
| Power Output Pentodes EL34 |
Maplin |
A power output pentode with the international octal (8-pin) base, primarily for the output stages of audio power amplifiers. The valve was especially designed with push-pull 'ultra-linear' (distributed load) operation in mind. Given the appropri |
 |
| Practical Oscillator Circuits |
Babani |
One of the most frequently used electronic â??building blocks is the oscillator, and the aim of this book is to provide a rich source of these for enthusiasts to experiment with and perhaps use in their own designs. Extensive coverage is given to circu |
 |
| Preamplifier and Filter Circuits |
Babani |
This book provides circuits and background information for a range of preamplifiers, plus tone controls, filters, mixers, etc. The use of modern low noise operational amplifiers and a specialist high performance audio preamplifier results in circuits that |
 |
| Pre-Sensitised Copper-Clad Board |
Maplin |
Single and double-sided copper clad SRBP and glass fibre boards coated with a positive photo-resist suitable for use with our UV exposure box. The boards are covered with light proof protective film, which should not be removed until the board is used. Th |
 |
| PT-200 Blow Torch |
Pro-iroda |
· State of the art waterproof piezo electronic ignition system · Lightweight eronomic design · Flame temperature up to 1300°ree;C · Adjustable high outpuflame · Runs a minimum of 60 minutes o |
 |
| P.T.F.E Tape |
Maplin |
A toolbox essential for ensuring threaded seals are water-tight. Wrap around the thread with a minimum 50% overlap. Certified to BS 7786 and WRC approved for connection to portable water supplies. Provides water-tight seal 12mm width x 12m length |
 |
| Push Solenoid |
Maplin |
The SD181 push solenoid represents a general purpose axial solenoid ideal for use in a variety of applications. As well as the convenient mounting offered by a locking nut, the plunger also has a circlip fitted to prevent it from being removed from the ma |
 |
| PVC Insulation Tape |
Maplin |
A range of strong, flame retardant PVC tape suitable for general electrical insulation work, which is certified to BS3924. Its low cost makes this tape ideal for tagging and colour coding as well as insulating cables. The tapes all have a width of 19mm an |
 |
| PVC Insulation Tape 10 Pack |
Maplin |
Strong, self adhesive, flame resistant PVC tape suitable for general electrical insulation work. The tape is certified to BS3924 and is supplied in a 10 pack of 5 assorted colours. All tapes are 19mm wide and 20m long. |
 |
| Radial Electrolytic Capacitors |
Maplin |
A range of small long life (2000H) electrolytic capacitors designed for direct mounting on PCBs. Tolerance ±20% Temperature range: â?"400C to +850C Cap Working Case Size(mm) Leakage Power Ripple current(µF) Voltage L |
 |
| Rectangular Shaped LEDs <I> |
Kingbright |
A rectangular shaped LED that gives a bright, evenly lit, solid bar of colour over the area 5.6 x 3.2mm. The lamps may beeasily stacked to form bargraph meters. Overall dimensions: 6.4 x 3.8 x 6.7mm deep. Available in red and green. A panel mounting clip |
 |
| Rectifier Diodes |
Maplin |
Type Case PIV IF Max VF drop Max IR Style V A (V A) (µA V) BY127 D015 1250 1 1.1V 1A 10µA 1250V 1N4001 D041 50 1 1.1V 1A 10µA 50V 1N4002 D041 100 1 1.1V 1A 10µA 100V |
 |
| Red Tamper Evident Seal |
Servisol |
An air drying sealant designed to identify components as â??factory fitted where tamper evidence is required. Excellent adhesion to plastics and metal Touch dry in 10 minutes Use for tamper proofing screws, nuts, components, and warranty seals H |
 |
| Replacement Antex Bits |
Maplin |
A range of replacement bits for the indicated soldering irons. These bits are all iron clad to give long life, and they must therefore not be filed or they will quickly disintegrate. They should only be cleaned by wiping with a damp sponge when they are h |
 |
| Replacement Parts for Gas Soldering Iron and Combination Gas Torch Kit |
Maplin |
Soldering iron bit, pointed tip. Soldering iron bit, chisel tip 3.5mm. Soldering iron bit, chisel tip 7mm. Soldering iron bit, diagonal tip 2.5mm. Soldering iron bit, diagonal tip 3.5mm. Catalytic soldering head. |
 |
| Replacement Parts for Pipemaster |
Antex |
Replacement heads in 10mm and 22mm. They are supplied in pairs. |
 |
| Resin-Dipped Ceramic Capacitors |
Maplin |
A range of high quality, multilayer, plate ceramic capacitors, offering a very high capacitance in a very small case at a very economical price. Applications include coupling, decoupling and filtering. Specifications: Tolerance: 10pF to 220pF: &am |
 |
| Resistor Starter Pack E3 |
Maplin |
High-quality carbon film resistors with a connecting wire that is easily soldered. This pack contains 30 of each of the following values: 10Ω, 22Ω, 47Ω, 100Ω, 220Ω, 470Ω, 1KΩ, 2K2Ω, 4K7&o |
 |
| R.F. Choke |
Maplin |
An axial lead, lacquer-coated radio frequency choke, featuring high inductance and small size. Inductance: 4.7mH Qmin: 35 (Test frequency: 252kHz) Rated current: 55mA Dimensions: 9.2 x 4mm dia. |
 |
| R.F. Chokes |
Maplin |
A range of RF chokes having a triple barrier against moisture, and high termination strength and reliability. Colour code (as resistors) gives value in µH. Specifications: Rating: 1/3 W @ 70°C Insulation resistance: > |
 |
| RF Encoder/Decoder Chipset |
RF Solutions |
The RF Solutions RF600E & RF600D are easy to use encoder and decoder I/Cs. They have been designed to achieve the maximum possible range from any radio /infrared transmitter receiver set. Unlike other encoder /decoder devices the RF600E/600D provide a |
 |
| RF RS232 Comms Chipset |
RF Solutions |
The RF RS232 Comms Chipset provides a simple interface between standard CMOS/TTL asynchronous serial data such as a microcontroller output and an RF Module (Transceiver, Transmitter or Receiver). It is simple to use with minimal interface. It provides au |
 |
| RGB Full Colour LED |
Kingbright |
This standard 6-pin DIP design contains 3 ultra bright LED chips (RGB) within one package to produce various colours in the visible spectrum, including white light, with a wide viewing angle of 100. The superior heat dissipation capability, enhanced by th |
 |
| Round-base Relays |
Maplin |
High power standard industrial relays with DPDT contacts on an octal base and 3PDT contacts on an 11-pin base. The relay is fully enclosed and will plug in to any standard 8-pin or 11-pin round base. It is a direct replacement for all standard industry ty |
 |
| Rubber Toughened Electronic Bonding Kit |
RiteLok |
RiteLok RT3500B rubber toughened formulation gives improved resistance to impact, vibration, thermal shock and humidity compared to standard cyanoacrylate adhesives. This product can be used on a wide range of substraites, giving excellent bond strength a |
 |
| Screwlock Adhesive |
RiteLok |
Ritelok TL22 is designed for low strength threadlocking applications on soft metals where the components require disassembly or adjustments at a later date without stripping the threads. Low strength adhesive Bonds metal to metal Ideal for small set |
 |
| Sealed Reed Relays |
Maplin |
A sealed reedrelay suitable for useat voltages from 3·8V to22V with single-pole make or double-pole make actions. The highresistance coil enablesthe relay to be drivendirectly by 74 seriesICs and most logic buffers. At the same time the relay can swi |
 |
| Semiconductor Insulators |
Maplin |
Semiconductor insulating washers that give excellent heat conduction. 4 types are available: TO3, TO66, TO220 and TOP3 |
 |
| SE Series Low Profile Radial Electrolytic Capacitors |
Maplin |
A range of aluminium cased electrolytic capacitors with values ranging from 0.1 to 220µF with voltages from 6.3 to 63V. Suitable for operation between â?"40 and +85C. Load life rating of 2000h at 85C. Low profile 5mm high design makes th |
 |
| SFH2030 Silicon Photodiode <I> |
Siemens |
A silicon photodiode fabricated in PIN planar technology that can be operated either as a photodiode, with reverse voltage, or as a photovoltaic cell. The device is in a 5mm package and has solder tab terminals with 2.54mm(0.1in.) lead spacing. A dayligh |
 |
| SFH300-2 Phototransistor |
Siemens |
A highly sensitive linear NPN silicon phototransistor, enclosed in a tubular 5mm plastic package that can be easilymounted into holes and preformed plastic sleeves, e.g., LED mounting assemblies. The device features a clear plastic lens, a 50 acceptance a |
 |
| SFH309 Phototransistor |
Siemens |
A silicon phototransistor in a standard T1 (3mm) size plastic package, idealfor low-cost, high volume applications such as IR remote control etc. The device matches with infrared emitter SFH409 and has good linearity, anda narrow acceptance angle of 32.Le |
 |
| SFH409 GaAs Infrared Emitting Diode |
Siemens |
A GaAs infrared emitting diode in a standard T1 (3mm) size plastic package, that has been designed for a variety of low-cost, high volume applications, e.g., IR remote control and other consumer and entertainment products. The device is an excellentmatch |
 |
| SFH487P GaAlAs High Power Infrared Emitting Diode |
Siemens |
A high power gallium aluminium arsenide infrared emitting diode, with a very wide beam that emits radiation in the near infrared range (880nm peak). The emitted radiation, which can be modulated, is generated by forward flowing current. The device is encl |
 |
| Side-Looking LEDs |
Maplin |
A range of side-looking LEDs in a very low profile package, designed to be used for illuminating LCD displays (usually mounted at each end of the display glass). Available in yellow, yellow/green and orange/red. Each package contains two LEDs, giving a f |
 |
| Signal Strength Meter |
Maplin |
A square-faced signal strength meter which may be back-lit to show up a green scale. Scale is marked â??Signalâ?? and 0 to 5 for calibration. |
 |
| Silicone Grease with PTFE |
Maplin |
Water resistant High quality insulator Prevents arcing Excellent lubricating properties Supplied with extension tube Supplied in a 200ml can . |
 |
| Silicone Resin Spray |
Servisol |
Rejuvenates faded and worn surfaces Provides high gloss shine Cures to semi-permanent coating, which is resistant to handling, wiping, moisture and sunlight For use on cabinets, speaker casings, desktops and automotive trim Supplied in a 400ml aer |
 |
| Silver Bearing Soft Solder |
Maplin |
A lead free alloy solder containing a non- corrosive flux. This solder is 4% Silver 95.5% Tin & 0.5% Copper. We recommend this solder for use with the iron-clad and nickel-clad bits supplied with our soldering irons. Solder is available in 1mm 100g, 2 |
 |
| Silver-Plated Plugblock Type RH-10S |
Maplin |
A high quality plugblock with silver-plated contacts for low contact resistance. The plugblock has a total of 640 contacts arranged in two blocks of 64 rows of 5 interconnected sockets on a 2·54 x 2·54mm matrix. The distance between the two centre r |
 |
| Silver-Plated Plugblock Type RH-21B |
Maplin |
A plugblock comprising one RH-10S and two RH5DS plugblocks mounted on an attractive blue base with three terminal posts and a component bracket. This unit thus provides a total of 840 contacts. Specification as RH-10S above. Dimensions: 190x118x19mm thick |
 |
| Silver-Plated Plugblock Type RH-32S |
Maplin |
A plugblock comprising two RH-10S and three RH- 5DS plugblocks mounted on an attractive blue base with three terminal posts and a component bracket. This unit thus provides a total of 1580 contacts. Specification: as RH-10S above. Dimensions: 190x168x19m |
 |
| Simple Sensor Terminal Block Projects |
Babani |
Sensors are like the â??eyes, ears and nose of an electronic system. They come in many forms including contact, light, heat, sound, magnetic, motion, resistance and voltage-operated sensors, all of which are covered by projects in this book. These cons |
 |
| Small Temperature Module FM-880LPEX |
Maplin |
A compact and highly accurate temperature module ideal for use in applications where external/remote temperature sensing is required. The module covers temperatures in the range â?"40C to +50C in 0·1C steps, sampling period is 15 seconds. T |
 |
| SN75176B Bi-Directional Transceiver |
Maplin |
A bi-directional transceiver IC meeting with EIA Standards RS-422/RS-485/CCITT V.11/CCITT V.27 and EIA Standards RS-485/ISO 8482:1987(E) respectively. Designed for bi-directional data communications on balanced multipoint transmission lines. Each device c |
 |
| Soldering Iron Kit SK5 |
Antex |
An attractive presentation kit that makes the perfect present for the beginner. A superb CS 18W soldering iron and stand ST6 neatly packaged with full instructions on how to use the iron, as well as some general hints on soldering. |
 |
| Soldering Iron Kit TCK-50 |
Antex |
A quality soldering kit that is ideal for the serious hobbyist and offers excellent value for money. The kit incudes a temperature controlled TCS240 soldering iron complete with a moulded mains plug fitted with a 3A fuse, a ST6 stand, a desolder pump and |
 |
| Soldering Iron Stand |
Antex |
use with our smaller Antex soldering irons. Manufactured from a high grade insulation material with a chromium-plated strong steel spring. The sponge serves (when damped) to keep the soldering bits clean. Spare bits can be accommodated on the stand. A st |
 |
| Soldering Iron Stand |
Maplin |
A neat and functional soldering iron stand that is ideal for use with all soldering irons (except some fume extraction types). Double spiral spring construction makes it virtually impossible to accidentally touch the iron when inserted into the stand. F |
 |
| Soldering Kit SK6 |
Antex |
An attractive presentation kit that makes the perfect present for the beginner. A superb XS 25W soldering iron and the new stand ST-6, neatly packaged with full instructions on how to use the iron, as well as some general hints on soldering. A small leng |
 |
| Soldering Stand ST6 |
Antex |
An attractive soldering stand designed primarily as a general stand for any Antex-type soldering iron, and which is just as suitable as a replacement for the SK-5, SK-6, 650PS, 660TC and 690SD soldering kits. |
 |
| Solderpro 120 Gas Soldering Iron |
Maplin |
A sturdy butane gas (lighter fuel) powered soldering iron. This iron avoids the restrictions often imposed by cables & the availability of a suitable electricity supply. The iron is supplied with a fine point soldering tip. A range of spare tips are a |
 |
| Solderpro 120 Gas Soldering Iron Kit |
Pro-iroda |
A complete gas soldering kit with the powerful Solderpro 120 gas soldering iron. The kit includes: Solderpro 120 Solder Cleaning sponge Gas torch tip Hot knife tip Carry case Please note these are supplied unfilled. Butane gas available separately, Order |
 |
| Solderpro 50 Gas Soldering Iron |
Pro-iroda |
The Solderpro 50 is a powerful tool packed into a very small package for the serious technician or hobbyist who needs the versatility of a multifunction heat tool which is truly pocket sized. Pinpoint 1300C adjustable flame Long lasting quick heat-up |
 |
| Solderpro 50 Gas Soldering Iron Kit |
Pro-iroda |
The Solderpro 50 Kit includes the Solderpro 50 along with some of the most popular attachments including 1mm catalytic soldering tip Torch head for pinpoint flame Hot knife attachment Hot air blower Tip cleaning sponge Coil of solder Heavy duty box |
 |
| Solderpro 50 Gas Soldering Iron Tips |
Pro-iroda |
A range of tips to suit the Solderpro 50 gas soldering iron, Order Code N11AR & Solderpro 50 Kit, Order Code N12AR. Order Code Description Size N82AR Pointed Tip 1mm N83AR Chisel Tip 2mm N05AQ Hot Knife Tip N06AQ Heat Blower N |
 |
| Solder Pro 70 Gas Soldering Iron |
Iroda |
A compact, pocket sized, butane gas (lighter fuel) soldering iron for use in those areas of soldering where mains power is unavailable or trailing leads are a hindrance. The strong nylon casing will hold sufficient liquid butane for one hourâ??s contin |
 |
| Solderpro 70 Gas Soldering Iron Kit |
Pro-iroda |
A compact, pocket sized kit with an iron & accessories to cope with a multitude of soldering/hot air applications. This kit includes: 1mm catalytic soldering tip Torch head for pinpoint flame Hot knife attachment Hot air blower Tip cleaning sponge |
 |
| Solder Pro 70 Gas Soldering Iron Tips |
Pro-iroda |
A range of tips to suit the Solder Pro 70 gas soldering iron, Order Code N95AP & Solder Pro 70 Kit, Order Code N13AR. Order Code Description Size N01AQ Pointed Tip 2mm N02AQ Chisel Tip 2mm N03AQ Chisel Tip 4mm N04AQ Angle Tip 3m |
 |
| Solder Station |
Maplin |
· 50W soldering iron · Adjustable temperature range · Anti-static ground outp · LED power indicator · Pack of 3 assorted tips available separately, Order Ce XXXXX A soldering station developed to mee |
 |
| Spare Tips for Solderpro 120 Gas Soldering Iron |
Pro-iroda |
A range of tips to suit the Solderpro 120 gas soldering iron, Order Code N14AR & Solderpro 120 Kit, Order Code N15AR. Order Code Description Size N32AT Pointed Tip 1mm N33AT Pointed Tip 2mm N34AT Chisel Tip 3mm N35AT Diagonal Tip |
 |
| Spot Face Cutter |
Maplin |
Designed for accurate and clean breaking of the copper strips on stripboard. For best results use light pressure. |
 |
| Spray Adhesive |
Maplin |
High strength bond Quick and convenient Wide range of uses Ideal to use on furniture, flooring and for bonding foam to a wide range of surfaces Do not use on surfaces where temperatures may exceed 50C. Supplied in a 500ml can |
 |
| Spray Glue |
Servisol |
Permanent, high strength adhesive Highly versatile. Will bond wood, metal, plastics, rubber, glass, paper, card, vinyl and felt Fast and effective, tack time 2-4 minutes Suitable for uses such as speaker coverings, television cabinet veneers, snooke |
 |
| SRBP Matrix Boards |
Maplin |
A range of SRBP boards punched with holes on a 2·54mm (0·1in.) matrix. Plain board and boards with copper strips on one side are available in various sizes. Type Overall Number Number size (mm) of of holes copper in each strips strip Plain 3962 |
 |
| Staggered Vane Heatsink for TO3 |
Maplin |
A black anodised, staggered vaned heatsink pre-drilled to accept TO3 style cases. Temperature rise: 6C/Watt. |
 |
| Standard Dual-Gang Potentiometers |
Maplin |
A range of rotary dual-gang carbon track potentiometers with printed circuit mounting terminals. Fixing hole required: 10.5mm. Power rating: 0.4W linear, 0.2W log. Max. voltage: 500Vdc. Tolerance: ±20%. Overall shaft length 50mm. The following |
 |
| Standard Potentiometers |
Maplin |
A range of carbon track potentiometers with printed circuit board mounting terminals. Fixing hole required: 10.5mm (13/32in.). Power rating: 0.4W linear, 0.2W log. Max. volt: 500Vdc. Tolerance: ±20%. Overall shaft length 50mm. The following val |
 |
| Standard Range 6VA Chassis 12VA Chassis 25VA Chassis Mounting 50VA Cha |
Maplin |
Dimensions: Size (W x D x H): 91 x 70 x 77mm Fixing centres: 4 holes @ 57 x 45mm Output: |
 |
| Standard Type with Switch |
Maplin |
A range of rotary carbon track potentiometers with DPST switch. The potentiometer has printed circuit mounting terminals. Fixing hole required: 10.5mm. Power rating: 0.4W linear, 0.2W log. Max. voltage: 500Vdc. Tolerance: ±20%. |
 |
| Starter Pack E12 |
Maplin |
The kit contains the following values:10, 12, 15, 18, 22, 27, 33, 39, 47, 56, 68 and 82 ohms plus all decade values up to 1M ohms. Features: Ideal for the electronic enthusiast Contains 610 resistors Excellent value |
 |
| Straight Earth Cords |
Maplin |
Straight earth connectors for use with antistatic protection equipment. Cord AS37S is terminated at one end with a 10mm female press stud and a 4mm banana plug at the other and includes a fitting crocodile clip. Overall cord resistance is 4.4M ohms. The c |
 |
| Stripboard |
Maplin |
Suitable for all applications where a conventional tag strip or group board might be used, with the advantage that small or large components are neatly accommodated. Components can be mounted across or along the strips. Copper strips run across the board |
 |
| Strong Gaffer Tape |
Maplin |
* Very tough, waterproof, cloth tape, that can still be torn by hand * Suitable for indoor and outdoor use * 50mm x 50m * Ideal for securing, binding and repairing White Tape Order Code N86AL Black Tape Order Code N87AL Silver Tape Order Code N88AL |
 |
| Student Stamp & Development Kit |
Milford Instruments |
The Student Stamp is a robust version of the Basic Stamp 1 and is almost certainly the easiest way to learn about PIC & microcontroller programming. You will start by writing simple routines in Basic and then program the microcontroller which will the |
 |
| Sub-Miniature |
Maplin |
A range of very small transformers that are wire ended. All types have 100mA output. Overall size: 37 x 31 x 30mm. Fixing centres: 45mm. All primaries tapped 0 to 240V. Type Secondary 3V 3-0-3V 6V 6-0-6V 9V 9-0-9V 12V 12-0-12V |
 |
| Sub-Miniature Fully Enclosed Carbon Preset Potentiometers |
Maplin |
A new range of sub-miniature horizontal and vertical mounting linear track presets fully enclosed in a flame retardant plastic housing. The insulated slider can be adjusted from either side by a tool with a blade 1 to 2.3mm wide. Power rating 0·.15W at |
 |
| Super-Bright Types |
Kingbright |
Super-bright red LEDs in four sizes. The LEDs fit the appropriate panel mounting clips. The cathode is denoted by the flat on the body and by the short lead. The LEDs have a diffused lens giving a wide viewing angle. Specifications: Forward voltage at IF |
 |
| Supertwist Alphanumeric LCD Modules |
Maplin |
A range of alphanumeric LCDs, which are all supertwist (Except Order Code N24AZ, which is TN). The LCDs use the industry standard 4 or 8 bit parallel interface using the HD44780 and HD44100 (or OKI/Samsung equivalent) driver chip protocols. All LCDs have |
 |
| Switch Cleaner |
Maplin |
A highly efficient general purpose cleaning solvent Cleans and protects Ideal for the removal of stains, coatings printing inks, oil, grease and dirt Does not cause corrosion Safe to use on most plastics or fibres Suitable for cleaning mos |
 |
| Tantalum Bead Capacitors |
Maplin |
A range of resin-dipped solid tantalum bead capacitors featuring very high values of capacitance in an extremely small package. Manufactured to ISO9002 and ISO14001 standards. Note: Due to the instability of the price of tantalum, prices are subject to c |
 |
| TBA820M |
Maplin |
TBA820M A very useful audio-amp in an 8-pin DIL package. The IC features a very low minimum working supply voltage of 3V, low quiescent current, good ripple rejection, no crossover distortion and low power dissipation. Maximum supply voltage is 16V into |
 |
| TDA2003V/H |
Maplin |
The device provides a high output current capability of up to 3.5A, and very low harmonic and crossover distortion. The device is designed for single-ended supply operation in the range 8 to 18V and applications include in-car stereos and radios. It can o |
 |
| TDA2005M |
Maplin |
A 20W power booster IC for use in cars. The integrated circuit is fully protected against damage in use. It is protected against output short circuits across the speaker or to ground (AC or DC) and it protects the loudspeaker under this condition as well. |
 |
| TDA2006V |
Maplin |
A high quality audio-amp in a 5-pin TO220 package that does not require insulating washers between the metal tab and the heatsink in single rail applications. The amp will operate with single or split power supplies. The distortion up to 8W with 4 ohms lo |
 |
| TDA2030AV |
Maplin |
A high quality audio-amp in a 5-pin TO220 package that does not require insulating washers between the metal tab and ) Parts List R1: Min Res 22k (M22K) R2: Min Res 680 Ohms (M680R) R3: Min Res 22k (M22K) R4,5: Min Res 1 Ohms (M1R) R |
 |
| TDA2040V |
Maplin |
A monolithic power amplifier IC intended for use as a high quality, class AB audio power amplifier. Typically it provides 22W output power into 4 ohms with 0.5% distortion, from a 32V supply. The device is designed to operate from a split power supply and |
 |
| TDA2050V |
Maplin |
A high quality audio-amp in a 5-pin TO220 package that does not require insulating washers between the metal tab and heatsink in single rail supply applications. The amp will operate with single or split supplies. The amp can provide 32W rms into a 4 ohms |
 |
| TDA2822M |
Maplin |
A stereo power-amp designed for use in portable cassette players and radios. A 3V supply can be used to drive headphones providing 20mW in 32 ohms per channel, and a 9V supply will provide 1W in 8 ohms per channel for small loudspeakers. Parts List R1, |
 |
| TDA7052 |
Maplin |
A power-amp designed for use in low voltage battery operated equipment, where a high output power is still required. By using the Bridge Tied Load principle in the amp, an output power of 1·2W into 8 ohms is achieved from a 6V supply. The gain of the a |
 |
| Temperature Controlled Soldering Station |
Maplin |
A high quality soldering station developed to meet the needs of electronics professionals. Constructed using sophisticated electronic circuitry enabling the user to change the tip temperature from 300F (150C) to 790F (420C) without the need to change the |
 |
| Temperature Controlled Soldering Station 660-TC |
Antex |
This very robust soldering unit comes with the TC50 24V 50W iron and the ST-6 bench stand. The unit is able to control the temperature of the irons between 65<+>o+>C and 450<+>o+>C, and is controlled by a thumbwheel on the fron |
 |
| Temperature Module |
Maplin |
A very versatile digital thermometer module with the LCD display and circuitry on a small pcb with a16-way solder edge connection. The PCB is fixed to a small plastic bracket that houses the battery. The module has an on-board temperature sensor or an ex |
 |
| Tip Tinner/Cleaner TTC 1 |
Maplin |
The TTC 1 is a small block of electronics-grade solder powder and chemicals compacted into the shape of a thick disc. It is packaged in a metal container, complete with lid and self adhesive pad on the underside so that it can be fixed to any convenient s |
 |
| TL071CN, TL072CN & TL074CN |
Maplin |
The JFET input operational amplifiers in the TL07x series are designed as low-noise versions of the TL08x series with low input bias and offset currents and fast slew rates (typically 13V/µs). The low harmonic distortion (0.003%) and low noise ( |
 |
| TL081CN, TL082CN & TL084CN |
Maplin |
A low-cost general purpose range of JFET op-amps featuring high slew rates (13V/µs), low distortion (0.003%), low input bias and offset currents, and low offset voltage temperature coefficient. Each device features a well-matched, high voltage J |
 |
| Toroidal Lighting Transformer |
Maplin |
This toroidal transformer is specifically designed to work with individual lamps. It is double insulated and has self resetting thermal overload protection. Its small size makes it ideally suited for use with recessed downlighter and eyeball fittings. Sp |
 |
| Transformer Kits |
Maplin |
At last you can wind your own mains transformers to your specification. Some power supply requirements might include an unusual secondary winding, which can be easily catered for by building a transformer kit, thereby obviating the tedious process of sear |
 |
| Transient Suppressors |
Maplin |
These devices are simply connected directly across the power supply. They have a very high resistance up to the Vm voltage shown in the table below and therefore usually may be ignored, but the moment a transient spike appears on the supply line whi |
 |
| Tri-Colour LED |
Kingbright |
A single LED, encapsulated in a diffused white package with three leads, that can be made to emit light of any colour of the spectrum from green through to red. Available in 3mm, 5mm and 10mm diameter round packages, a 5 x 2mm rectangular package. All typ |
 |
| Trigger Transformers |
Maplin |
Trigger transformers for use with our xenon tubes. The 6kV type is for use with the Beacon tube. Specifications: Secondary volts: 4kV 6kVPrimary volts nominal: 170V 190VTrigger capacitor: 0·033µF 0·047µFEnergy: 0·6mj |
 |
| Tripad Board |
Maplin |
This board is specifically designed to mount dual-in-line integrated circuits and a great number of these and any other kind of component may be easily mounted. The board has 39 copper strips, each with 62 holes, and each strip is divided into 20 3-hole s |
 |
| Turned Pins IC Sockets |
Maplin |
A range of high quality 200 insertion turned pin DIL IC sockets, for production and replacement use. Manufactured in UL94-V0 filled polyester with berylium copper contacts. Suitable for end to end and side to side stacking. Specifications: Contact ma |
 |
| Twin Pack of Clear Tape |
Maplin |
Two 50m rolls of cellotape. Ideal for repairing tears, wrapping presents, and removing bits from clothing. |
 |
| Twisted Vane Heatsink for TO126 |
Maplin |
suitable for one TO126 etc. style device. Base is 19 x 22mm. One hole provided in the centre of 4mm diameter. Height of fins, 19mm.Thermal rating 21C/W. Black anodised finish. Twisted vane heatsink |
 |
| Type 2141 |
Maplin |
Single-ended pin 1·3mm (0·052in.) dia. Supplied in packs of 100. Type 2141 |
 |
| Type 2144 |
Maplin |
Double-ended pin 1mm (0·04in.) dia. Supplied in packs of 100. |
 |
| Type 2145 |
Maplin |
Single-ended pin 1mm (0·04in.). Supplied in packsof 100. |
 |
| ULN2003A Darlington Arrays |
Maplin |
High-current Darlington Array for driving a number of families of logic and loads. These versatile devices can be used for driving loads including solenoids, motors, LEDs, thermal printheads, etc. Each device contains seven separate Darlington pairs with |
 |
| ULN2801A/3A Octal Darlington Driver Arrays 2801 |
Maplin |
ULN2801A/3A Octal Darlington Driver Arrays 2801 Eight separate Darlington amplifiers in one 18-pin package, each capable of supplying 500mA at up to 50V. Outputs may be paralleled to give up to 4A at 50V (at 23% duty cycle and 25C). Internal diodes are |
 |
| Ultimate Double Sided Tape |
Maplin |
The ultimate in high strength adhesive tapes. This double sided tape is constructed from a pure acrylic adhesive giving a tremendously high strength permanent bond. It can be used in a wide range fo applications where strength and security is paramount s |
 |
| Ultra-Bright and Hyper-Bright LEDs |
Kingbright |
Ultra-Bright andHyper-Bright LEDs Four sizes of Ultra-bright red LEDs are available and two sizes of Hyper-bright type. The cathode is denoted by the flat on the body and the short lead. The LEDs have a water-clear lens and a narrow viewing angle. Specifi |
 |
| Ultra Miniature High Power Mains Relay |
Maplin |
An ultra-miniature relay capable of switching 10A resistive at 240Vac. The relay is fully enclosed and is designed for direct printed circuit mounting. Available with a single-pole changeover silver cadmium oxide contact. Dimensions: 22 x 17·4 x 11· |
 |
| Ultra Miniature Relay |
Maplin |
An ultra miniature relay designed for direct printed circuit mounting. The relay is fully enclosed on the top and sides and there is an insulation sheet on the bottom. Available in single-pole changeover style. Silver contacts. Dimensions: 14·8 x 9· |
 |
| Ultra Violet Cure Adhesive |
RiteLok |
Ritelok UV50 is a general purpose, high viscosity glass to glass and glass to metal bonder. Suitable for a wide range of applications requiring a totally clear and high strength bond area. Applications include bonding fibreoptics, glass, furniture, medica |
 |
| Universal Lubricant |
Maplin |
Excellent general lubricant Protective properties High performance Multi-application Has excellent de-watering and anti- corrosive properties Supplied in a 200ml can |
 |
| Universal Programmer |
Maplin |
Combines universal device programming, verification and testing. The UP-1 universal programmer supports a wide variety of devices with its 48-pin ZIF socket. The UP-1 is equipped with the most advanced technology. It uses the USB interface for PC communic |
 |
| Universal Test Socket |
Maplin |
A zero insertion force socket which can accept ICs of any size up to 40 pins, because its wide sockets permit 7.62mm, 10.2mm and 15.2mm (0.3in., 0.4in. and 0.6in.) wide ICs to be inserted. With the lever up, ICs can be inserted or removed with no force. T |
 |
| Universal Vaned Heatsink |
Maplin |
A black anodised, staggered vaned heatsink pre-drilled to accept TO3, TO66, SOT9, SOT32 and TO220 style cases. Temperature rise: 6C/Watt. |
 |
| US Mains TypeAuto-Transformers |
Maplin |
A range of single step-down transformers of 100VA, 450VA, 550VA and 650VA ratings to adapt UK 230/240V 50/60Hz mains supply to American standard 110/120V appliances. All types comply with BS7452, have enclosing steel shrouds and come complete with UK mai |
 |
| UV Exposure Units |
Maplin |
The steel-cased LV models are the most cost effective UV units offered. The tubes are in the base, which means the artwork has to be registered on the UV sensitive area and then placed face down onto the exposure area. Coloured black, each unit has a hing |
 |
| Valve Output Transformer |
Maplin |
A push-pull output transformer suitable for class A/B and B valve output stages at powers up to 20W rms. Screen grid taps are provided for distributed-load (â??ultra-linearâ??) designs, but need not be used. The transformer is intended for mountin |
 |
| Vaned Heatsink for TO220 |
Maplin |
2 vaned heatsinks suitable for TO220 style devices in black anodised aluminium and available as 2 different mounting types. Order Mounting Temp.Rise Code Type °C/Watt RN84F push-in 20 RN85G solderable 22.5 |
 |
| Variable Transformers |
Maplin |
A range of three robust, open style, variable auto-transformers which enable a 250V AC 50Hz voltage supply to be varied between 0 and 270V AC. These units are ideal for testing over- and under-voltage operation of mains equipment, as the range 240V &p |
 |
| Vertical Mounting PCB Solderable Heatsink |
Maplin |
A powerful versatile and solderable heatsink designed for use with TO202, TO220, TO218 and TOP3 style device packages. As the heatsink is plain undrilled, the device is attached using a retaining clip (order code RN83). This heatsink is available in 3 dif |
 |
| Vertical Twisted Vane PCB Mounting Heatsink |
Maplin |
2 low profile, vertical PCB mounting, twisted vane, aluminium heatsinks with a central device fixing hole. Suitable for use with TO220 style semiconductors. RN67X is a push-in version, while RN68Y is solderable. |
 |
| Vinyl Plastic Adhesive |
Bison |
Ideal for using in many household repairs to soft plastics. Apply to both surfaces and join together to get an instant, durable bond which retains its flexibility during its lifetime. Contact adhesive for soft PVC Transparent and flexible bond Water |
 |
| White Spray Grease |
Maplin |
Highly effective lubricant Water resistant Operational from -10C to +120C Ideal for use where a light coloured grease is desirable Supplied in a 200ml can |
 |
| Work Mat |
Maplin |
A tough, conductive, flexible, plastic mat which can be used to prevent the build-up of static charges on devices or equipment likely to be at risk. The mat has an earthing strap which may be clamped to a suitable earth by a jubilee clip. The static charg |
 |
| Wrist Strap with Cord |
Maplin |
For use when handling CMOS and other devices that are prone to electrostatic damage. This fabric wrist strap is comfortable to wear and prevents electrostatic charge building up. The strap is pulled tightly around the wrist and locked in place with a buck |
 |